Analysis and Measurements for Three Phase Circuits Engineering Assignment Help

Kirk, A. (2016). Data Visualisation: A Handbook for Data Driven Design. Thousand Oaks, CA: Sage Publications, Ltd.

ISBN: 978-1-4739-1214-4

• Read Chapter 4 Working With Data.

DATA: BASIC DATA ANALYSIS IN R/RSTUDIO

• Background: This course is all about data visualization. However, we must first have some understanding about the dataset that we are using to create the visualizations.Assignment:
  • Use R/RStudio to generate a word document with basic data analysis of the following dataset: dataset_price_personal_computers.csv
  • Use the following video to learn the simple commands to conduct basic data analysis with R/RStudio Part 1: As per attached below.
  • Use the following video to learn the simple commands to conduct basic data analysis with R/RStudio Part 2: As per attached below.

  Questions/Requests:

  • Create a summary of stats for the dataset. (provide a screenshot)
  • Create a correlation of stats for the dataset. (provide a screenshot) (Hint: Transform may be needed)
  • What is the Min, Max, Median, and Mean of the Price? (provide a screenshot)
  • What is the correlation values between Price, Ram, and Ads? (provide a screenshot)
  • Create a subset of the dataset with only Price, CD, and Premium. (provide a screenshot)
  • Create a subset of the dataset with only Price, HD, and Ram where Price is greater than or equal to $1750. (provide a screenshot)
  • What percentage of Premium computers were sold? (provide a screenshot)(Hint: Categorical analysis)
  • How many Premium computers with CDs were sold? (provide a screenshot)(Hint: Contingency table analysis)
  • How many Premium computers with CDs priced over $2000 were sold? (provide a screenshot)(Hint: Conditional table analysis)

  Your document should be an easy-to-read font in MS Word (other word processors are fine to use but save it in MS Word format). Your cover page should contain the following: Title, Student’s name, University’s name, Course name, Course number, Professor’s name, and Date.Submit your assignment on or before the due date.

Kirk, A. (2016). Data Visualisation: A Handbook for Data Driven Design. Thousand Oaks, CA: Sage Publications, Ltd.

ISBN: 978-1-4739-1214-4

• Read Chapter 4 Working With Data.

Question 1 (5 points)

Saved

HMO insurance benefit options include:

Question 1 options:

	HMO/POS.
	HMO/Network.
	HMO/Group.
	all of the above.

Question 2 (5 points)

Which is a delivery system approach for long-term care?

Question 2 options:

	Skilled Nursing
	Home Health
	Meals-on-Wheels
	All of the above

Question 3 (5 points)

Which of the following is correct about Medicare reimbursement?

Question 3 options:

	Medicare Part A pays for hospital services; Medicare Part B pays for physician services; Medicare Part C does not pay non-covered services; Medicare Part D pays prescription drug benefits.
	Medicare Part B pays for hospital services; Medicare Part A pays for physician services; Medicare Part C does not pay benefits; Medicare Part D pays prescription drug benefits.
	Medicare Part A pays for hospital services; Medicare Part B pays for physician services; Medicare Part C does not pay benefits; Medicare Part D pays prescription drug benefits.
	None of the above is correct.

Question 4 (5 points)

Which of the following is not a type of hospital according to its type of service?

Question 4 options:

	Community hospital
	Trauma center
	For-profit foundation
	Cardiac care facility

Question 5 (5 points)

Which of the following best defines the credentials of clinical psychologists?

Question 5 options:

	Licensed with a Medical degree
	Licensed with a Master’s level education
	Licensed with a Doctorate level education
	Licensed with a certification

Question 6 (5 points)

Consider the trend for more and more ambulatory care services in the U.S. What is/are the key factor(s) driving this trend?

Question 6 options:

	Cost reduction
	Patient and physician preference
	Insurance coverage provisions
	All of the above

Question 7 (5 points)

Which of the following is/are true about the licensed psychiatric social worker?

Question 7 options:

	Social workers have Master’s degrees, MSWs.
	Social workers assume counseling roles but do not prescribe.
	Both A and B are true.
	Neither A nor B is true.

Question 8 (5 points)

Which type of hospital has the shortest length of stays?

Question 8 options:

	Short-term psyche facility
	Subacute care
	Transitional care
	Trauma center

Question 9 (5 points)

What are some of the unique aspects of managing health care in a rural setting?

Question 9 options:

	Medical shortages areas (less than 100 people per square mile)
	Rural exemptions to allow P.A.s to practice without direct physician supervision
	Higher fee schedules for lower volumes of patients
	All of the above

Question 10 (5 points)

How is “quality” defined within health care organizations?

Question 10 options:

	Internal and external benchmarks
	Patient satisfaction surveys
	Clinical outcomes
	All of the above

(11) Discuss three settings for ambulatory care in the U.S. What kind of care is delivered in each? Who are the health care providers in the settings you have chosen?

(12) Discuss the various settings and arrangements for delivering mental health services. Your answer should define key types of diagnoses and the providers that deliver the care.

(13) Define and discuss retrospective and prospective payment methods in U.S. health care. Have these methods been effective? What problems have been noted with each? Support your answers.

(14) Discuss the three primary sources of organizational power in hospitals. How should these three interact in leading a hospital?

(15) Discuss, in your own words, the origins of government involvement in health care delivery in the United States. What were some of the key milestones and their impacts? What are at least 5 key responsibilities of health care administrators? Explain each responsibility and why it is important.

You will provide a comprehensive and detailed
manual documenting the step-by-step process for building a computer
using the components provided in LabSim 13.1: “Build a Computer from
Scratch.” The manual will be used by entry-level technicians, so it
should be clear, concise, and formatted using the IEEE citation style, with screenshots of each step from LabSim 13.1. Your manual should be similar to step-by-step instructions on How to Change the Oil in Your Car.
Note carefully how in this example, not only is each step described
individually, and in detail, but also there is a visual representation
of each step. You should model your submission along the same lines.
Keep in mind that your manual will be used as a guide for new
technicians.

The manual should not document how to complete
a LabSim section; rather, it should provide detailed instructions on
how to build an actual computer for a potential customer:

“Drag the motherboard from the shelf to the motherboard plate in the system case.”

“After properly grounding yourself, pick up the
motherboard and place it inside the area where the motherboard will sit
in the case. Align the screw holes on the motherboard with the screw
holes on the case. Use appropriate screws to mount the motherboard
inside the case, making sure not to scratch the surface of the
motherboard.”

To learn about the required parts which
must be present in your submissions, and to learn how you will be
assessed on this assignment, please take a moment to review the rubrics.

The manual will be submitted in three separate
parts, at three suggested milestone times. Part 1 addresses Sections
1-5 of the overall manual, Part 2 addresses Sections 6-10, and Part 3
addresses Sections 11-12.

PC Build & Manual Part 1:

1. Workspace Preparation (LabSim 2.0)

2. Installing Motherboard (LabSim 3.3)

3. Installing Power Supply (LabSim 3.2)

4. Installing CPU (LabSim 3.5)

5. Installing RAM (LabSim 3.7/3.8)

PC Build & Manual Part 2:

6. Installing Hard Drive (LabSim 5.2)

7. Installing Optical Drive (LabSim 5.3)

8. Installing Video Card (LabSim 3.12)

9. Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)

10. BIOS Configuration (LabSim 3.10)

PC Build & Manual Part 3:

11. Installing Windows 7 (LabSim 10.3)

12. Configuring Critical Windows Features (LabSim 9.0 and 10.0)

In addition to including the sections listed below, your manual should

• address the environment in which the computer build will
  take place. For example, what are the best practices when working in a
  carpeted room?
• not use computer jargon. Although the manual will be
  used to train new technicians, it may also be used by someone with
  limited computer knowledge, so the manual must be easy to understand.
• include explanations on methodology. For example, why is
  it important to use an antistatic grounding bracelet when working with
  the computer? Or why is it important to install memory sticks in pairs?

The 12 sections of the overall manual are as follows:

1. Workspace Preparation (LabSim 2.0)
2. Installing Motherboard (LabSim 3.3)
3. Installing Power Supply (LabSim 3.2)
4. Installing CPU (LabSim 3.5)
5. Installing RAM (LabSim 3.7/3.8)
6. Installing Hard Drive (LabSim 5.2)
7. Installing Optical Drive (LabSim 5.3)
8. Installing Video Card (LabSim 3.12)
9. Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)
10. BIOS Configuration (LabSim 3.10)
11. Installing Windows 10 (LabSim 10.3)
12. Configuring Critical Windows Features (LabSim 9.0, 10.0, 11.0, and 12.0)

You have been recently hired as a computer technician at a local

computer sales and repair shop. The shop offers a variety of services

that range from installing new applications and fixing computers to

recovering lost or deleted data. One service provided by this company is

the opportunity for customers to have a computer built to their

specifications. As a technician, it is your responsibility to capture

the customer’s unique requests.

As part of the training process, your manager would like to evaluate
how effective you are at this task, and asked that you complete a
project: creating a three-part manual that shows a user how to build a
computer, using a list of specifications. Your manual should also
describe potential problems you might encounter during the process and
ways to handle those problems.

When you are finished, you will submit each part of the
user manual for review. It will ultimately be used to train new computer
technicians at the shop.

After speaking with your manager about the manual, you
realize that you will be busy over the next few weeks. In addition to
working on the manual, you will also be preparing for the CompTIA A+
certification. One of the conditions of your employment is that you
obtain this certification within 60 days of being hired. Additionally,
there is also a great opportunity for you to form an integrated view of
the different aspects of networking which are tested in the
certification exam.

IEEE citation style,

For the Unit 2 Lab Assignment, we will continue to work on your project and take the deliverables that you identified in the Unit 1 Lab Assignment and build them into a Work Breakdown Structure (WBS) using Microsoft Project. In addition, we will add project team members into a personnel table in Microsoft Project and assign them to tasks in WBS.

Prior to starting the assignment please watch the following two videos:

1. How to create a WBS in Microsoft Project (Links to an external site.)Links to an external site.
2. How to add resources to a project:

Now that you have watched the videos, complete the following:

1. Access Microsoft Project from the Xendesktop. To access the Xendesktop, click ECPI Resources in the left navigation column. Under the University tab, select Environment under Xendesktop.
2. Download and open the following Project template.
3. Update the template to align to the deliverables and WBS that are applicable to your project. Add in the tasks, subtasks, and durations. There is no need to populate the dates or any other fields at this time.
4. Add your project team to the Resource sheet.
5. Assign resources to each of the tasks/subtasks.
6. Save your Project File to your computer and submit for grading (note: ensure you save the file where you will be able to access again in the next unit).