Discussion: Using Health Information Technology as a Source of Evidence-Based Practice Writing Assignment Help. Discussion: Using Health Information Technology as a Source of Evidence-Based Practice Writing Assignment Help.
(/0x4*br />
Discussion: Using Health Information Technology as a Source of Evidence-Based Practice
Before the digital revolution, health information technology supplied very limited support for evidence-based practice. If nurses wanted to be informed about cutting-edge research, their best bet was to either subscribe to leading journals or make periodic trips to the library. With the establishment of research databases, however, nurses became empowered to learn about and facilitate interdisciplinary and translational research. Databases are just one example of how health information technology supports evidence-based practice.
To prepare:
- Read the following scenario from the text (McGonigle & Mastrian, 2018, p. 506):
Twelve-hour shifts are problematic for patient and nurse safety, and yet hospitals continue to keep the 12-hour shift schedule. In 2004, the Institute of Medicine (Board on Health Care Services & Institute of Medicine, 2004) published a report that referred to studies as early as 1988 that discussed the negative effects of rotating shifts on intervention accuracy. Workers with 12-hour shifts realized more fatigue than workers on 8-hour shifts. In another study done in Turkey by Ilhan, Durukan, Aras, Turkcuoglu, and Aygun (2006), factors relating to increased risk for injury were age of 24 or less, less than 4 years of nursing experience, working in the surgical intensive care units, and working for more than 8 hours.
- Consider how the resources identified in the scenario above could influence an organization’s practice.
- Select an issue in your practice that is of concern to you. Using health information technology, locate at least three evidence-based practice resources that address your concern and that could possibly inform further action.
By Day 3
Post a description of your practice concern. Outline how you used health information technology to locate evidence-based practices that address this concern. Cite and include insights from the resources. Analyze how health information technology supports evidence-based practice.
Read a selection of your colleagues’ responses. Focus particularly on those questions raised to which you can add comments based on shared experiences or situations. Consider how your colleagues’ postings reflect and/or differ from your own perceptions and opinions. Review the Learning Resources for any clarification needed before responding.
By Day 6
Respond to at least two of your colleagues on two different days using one or more of the following approaches:
- Ask a probing question, substantiated with additional background information, evidence or research.
- Share an insight from having read your colleagues’ postings, synthesizing the information to provide new perspectives.
- Offer and support an alternative perspective using readings from the classroom or from your own research in the Walden Library.
- Validate an idea with your own experience and additional research.
- Make a suggestion based on additional evidence drawn from readings or after synthesizing multiple postings.
- Expand on your colleagues’ postings by providing additional insights or contrasting perspectives based on readings and evidence.
Please i worked in the hospital ; IMCU
Discussion: Using Health Information Technology as a Source of Evidence-Based Practice Writing Assignment Help[supanova_question]
Research Proposal Writing Assignment Help
I am applying to take a Ph.D. in materials physics in nanotechnology in one of UK or Europe universities. Your work is to find information about the field to establish a research gap. Write a research topic, state about six objectives (six research sections), and describe the methodology to be used. The report should have the following sections:
Title (or area) of the proposed research project:
Research Question:
Methodology:(should, mainly, be experimental)
Literature Review/Scientific Background:(Must be from most current materials)
The Significance of Research/Potential Impact:
Multidisciplinary Potential of Research:
The whole report should be at least 1500 words.
[supanova_question]
Assignment 3 Computer Science Assignment Help
Q1. What’s the difference between do.call function and lapply function in R. When we try to use searchTwitter function to retrieve info from twitter, what format are the info retrieved as? Is this format open? What are the advantages and disadvantages of this format?
Q2. The data below represents blogs posts discussing and linking to a viral video. The data is in the format of source ⇒ link. For example, huffington.com ⇒ video would be interrupted as huffingtonpost.com linking directly to the video. myblog.com⇒ huffingtonpost.com would be interpreted as myblog.com posting a link to a huffingtonpost.com blog entry about the video
1. Convert the data into a adjacency matrix.
2. Plot the network graph.
3.What are the number of possible connections?
4. Calculate the degree centrality of huffingtonpost.com.
[supanova_question]
Need help writing this paper Business Finance Assignment Help
The purpose of this assignment is to help students understand the influence that ethics and social responsibilities have on the strategic planning process.
Assignment Steps
Write a 700-word report in which you address the following:
- Define and explain the role of ethics and social responsibility in developing a strategic plan while considering stakeholder needs and agendas.
- Include at least one example of a company overstepping ethical boundaries for stakeholder agendas, and identify what types of preventative measures could be taken to avoid this type of situation.
- Present your findings to the class in a casual group setting.
Cite 3 scholarly references, including at least one peer-reviewed reference from the University Library.
The Subject must be Volkswagen PLease no plagairism
[supanova_question]
Picot statement and literature search Health Medical Assignment Help
The first step of the EBP process is to develop a question from the nursing practice problem of interest.
Select a practice problem of interest to use as the focus of your research.
Start with the patient and identify the clinical problems or issues that arise from clinical care.
Following the PICOT format, write a PICOT statement in your selected practice problem area of interest, which is applicable to your proposed capstone project.
The PICOT statement will provide a framework for your capstone project (the project students must complete during their final course in the RN-BSN program of study).
Conduct a literature search to locate research articles focused on your selected practice problem of interest. This literature search should include both quantitative and qualitative peer-reviewed research articles to support your practice problem.
Select six peer-reviewed research articles which will be utilized through the next 5 weeks as reference sources. Be sure that some of the articles use qualitative research and that some use quantitative research. Create a reference list in which the six articles are listed. Beneath each reference include the article’s abstract. The completed assignment should have a title page and a reference list with abstracts.
Suggestions for locating qualitative and quantitative research articles from credible sources:
- Use a library database such as CINAHL Complete for your search.
- Using the advanced search page check the box beside “Research Article” in the “Limit Your Results” section.
- When setting up the search you can type your topic in the top box, then add quantitative or qualitative as a search term in one of the lower boxes. Research articles often are described as qualitative or quantitative.
To narrow/broaden your search, remove the words qualitative and quantitative and include words that narrow or broaden your main topic. For example: Diabetes and pediatric and dialysis. To determine what research design was used, review the abstract and the methods section of the article. The author will provide a description of data collection using qualitative or quantitative methods.
Prepare this assignment according to the guidelines found in the APA Style Guide, located in the Student Success Center. An abstract is not required.
This assignment uses a rubric. Please review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.
[supanova_question]
[supanova_question]
2 part assignment Writing Assignment Help
assignment 1
In this assignment, I want you to look at a primary document (attached) from the New Deal, specifically a “fireside chat” given by President Franklin Delano Roosevelt outlining the purpose of his New Deal, and analyze the nature of its content. In a page or so, I want you to address the following questions.
1. What techniques does FDR use to appeal to average Americans?
2. How does FDR attempt in this speech to specifically address the fears of the American people in the wake of the Great Depression? Discuss at least one policy he outlines in this regard.
3. Finally, I want you to briefly assess how effective you think this speech was in helping calm the American public in this time of crisis.
Your response should be 1-2 pages in length, double-spaced
Write this paper as an Industrial Engineer.
The writing assignment as follows:
1. Given a world population of over 7 billion; I want you to look at latest
available data on energy consumption of countries per capita. List the top five
per capita energy users. Give a gross percentage assessment of their energy mix
(renewables, nuclear, fossil fuels, etc.). Include your reference sources.
2. Pick an industrial process and make suggestions regarding what improvements
`energy engineers’ can contribute to more energy efficiency and cost savings.
3. You are a founding member of an energy consulting company that specializes in
cost reduction though energy audits and process optimization in manufacturing.
You are making a presentation to the international chamber of commerce, which
includes many potential clients, on your area of expertise within the company.
They want to know your philosophical approach to managing world energy
requirements in the near future given the competitive environment for non-
renewable worldwide. Please give an outline overview of your presentation.
2 part assignment Writing Assignment Help[supanova_question]
Family handbook Writing Assignment Help
Each student is required to create a family handbook that you submit at the end of the semester and will serve as your final exam. There are two goals associated with this final project. The first goal is for your handbook to reflect the knowledge and skills you have acquired this semester. The second goal is for your handbook to serve as a reflective guide as you begin your teaching career. Family handbooks can be short or long, simple or complex, depending upon one’s personal philosophy and school policies. Your handbook should reflect the following general guides.
[supanova_question]
Short Answer Writing Assignment Help
Reflect on the concepts presented in the video and overview and the example of a growing body of research as captured in the article A Review of Facebook Research in the Social Sciences. Also, consider the question you posed about your advertisements in your observation journal in the last theme. Then, in a short answer response, address the following questions:
- How does social science inquiry advance and evolve over time?
- Why is it important that our understanding of social science concepts continue to develop and expand?
- Then, consider the question you posed in the observation journal, which you submitted in Theme 2. How could others build upon this question through additional research or follow-up questions?
My Research Questions:
As a social scientist, I would ask several questions, for example, based on the stereotype of women serving men, how do men feel watching a stereotype of what they are supposed to enjoy, and is it a valid stereotype?
Based on the Diaderm anti-wrinkle cream, attractive women are perceived as young. What causes women feel pressured to prevent aging but men do not? Based on the Colgate ad, does seeing a child deprived of clean drinking water affect the water wasting habits of a typical American?
[supanova_question]
Communication questions Business Finance Assignment Help
Case study 1 Wireless sensor network (WSN) can be defined as a group of spatially dispersed and dedicated sensors for monitoring and recording the physical conditions of the environment and organizing the collected data at a central location. WSNs measure environmental conditions like temperature, sound, pollution levels, humidity, wind, and so on. There has been tremendous research on how to use WSN technology in Agriculture and Livestock industry – one of the key sectors of Australian exports. Sense-T is one such initiative based in Tasmania and the network has proven it could help farmers by providing useful information in decisions making. Observing these positive results, recently a livestock giant VicStock came up with an idea to use a WSN in their farms to monitor the animals’ health and behaviour. The proposed pilot project will be implemented in one of their farms located in Gippsland area called MaffraStock. This farm is a 3 km x 3 km square shaped land and has got various types of animals including cattle, sheep and camel. The total number of animals is 2500. The plan is to tag each animal with a device equipped with sensors, a GPS tracker and an accelerometer that monitors the motion. One device generates 5 kB data per minute and there is a central node at the middle of the farm to collect data from all the sensors. This central node multiplexes data from all the sensors and uploads to a cloud based IoT platform through a wireless ISP link so that VicStock can analyse trends and detect anomalies. Planning to avoid licensing costs, the WSN uses ISM frequency bands for signal transmission. The ambient temperature around the farm is 200C which causes a small amount of thermal noise. However, it is found that thermal noise is only 5% of the total noise experienced by WSN channels.
a) Select a suitable frequency band for WSN and give reasons for your selection.
b) Calculate the channel capacity (minimum data rate) required for:
I. One sensing device to control centre channel II. Control centre to ISP channel
c) For both the channel types calculate the following noise levels experienced:
I. Thermal noise II. Total noise experienced
d) It is expected to maintain SNR of 63 at the control centre for sensor signals.
I. Calculate the signal power received at control centre from one sensing device. MITS5003 Wireless Networks and Communication
II. Calculate the bandwidth of the sensing device to control centre channel.
III. What will be the bandwidth of the multiplexed channel if FDM scheme is used?
e) Calculate the maximum free space loss experienced by the signals sent from sensors. (Assume control centre is located exactly at the centre of the landscape)
f) Determine the required transmission signal strength if other impairments such as attenuation and fading causes loss of 30% in signal power during the propagation from sensors to the control centre.
g) With your general knowledge in agriculture sector and business suggest functionalities for the cloud application to effectively use sensor data.
[supanova_question]
need help adding threads to finger implementation Programming Assignment Help
Application: Implementing Threading in a Client-Server Protocol
Server programs are rarely implemented as non-threaded applications, even though that is how you implemented your previous server application. Servers would not be able to provide the necessary throughput unless they used threading to allow for I/O to occur concurrently with servicing client requests.
For this Assignment, you will modify your finger server program from Week 6 to use threads. The server should activate a new thread to process each incoming client request, thus allowing client requests to be processed concurrently.
To prepare:
- Start up NetBeans.
- Open your implementation of the finger protocol from Week 6.
By Day 7, modify your finger server program to use threads. The server should activate a new thread to process each incoming client request, thus allowing client requests to be processed concurrently.
In addition, write a 5- to 7-page paper documenting the changes that you made and analyzing the impact the changes will have on the overall throughput and latency of the server.
Include in your paper responses to these questions:
- What other solutions might you consider in order to increase throughput and reduce latency?
- Which solution do you consider to have the better trade-off between performance and complexity?
- Which solution do you consider to have the better application of modularity, abstraction, hierarchy, and layering?
Remember to properly cite your sources according to APA guidelines.
Save your implementation of the threaded finger server in a “.zip” file. You will also submit your paper documenting the implementation and analysis of your server separately.
[supanova_question]