Information Security Planning Computer Science Assignment Help

Information Security Planning Computer Science Assignment Help. Information Security Planning Computer Science Assignment Help.

br />

Identify, define, and describe the three or four most important elements of an Information Security Plan. Be sure to identify and support why your selected elements are the most important.

The paper must following the formatting guidelines in The Publication Manual of the American Psychological Association (2010), (6th ed., 7th printing), and contain a title page, five scholarly references, three to five pages of content, and a reference page. More APA assistance can be found at the Purdue University Online Writing Lab.


please use in-text and paragraphical citations as much as you can

Thank you

Information Security Planning Computer Science Assignment Help[supanova_question]

Introduction of Algebra Mathematics Assignment Help

Read the following instructions in order to complete this discussion, and review the example of how to complete the math required for this assignment:

  1. Think of something you want or need for which you currently do not have the funds. It could be a vehicle, boat, horse, jewelry, property, vacation, college fund, retirement money, or something else. Pick something which cost somewhere between $2000 and $50,000.
  2. On page 270 of Elementary and Intermediate Algebra you will find the “Present Value Formula,” which computes how much money you need to start with now to achieve a desired monetary goal. Assume you will find an investment which promises somewhere between 5% and 10% interest on your money and you want to purchase your desired item in 12 years. (Remember that the higher the return, usually the riskier the investment, so think carefully before deciding on the interest rate.)
  3. State the following in your discussion:
    • The desired item
    • How much it will cost in 12 years
    • The interest rate you have chosen to go with from part b
  4. Set up the formula and work the computational steps one by one, explaining how each step is worked, especially what the negative exponent means. Explain what the answer means.
  5. Does this formula look familiar to any other formulas you are aware of? If so, which formula(s) and how is it similar?
  6. Incorporate the following five math vocabulary words into your discussion. Use bold font to emphasize the words in your writing (Do not write definitions for the words; use them appropriately in sentences describing your math work.):
    • Power
    • Reciprocal
    • Negative exponent
    • Position
    • Rules of exponents

Your initial post should be 150-250 words in length.

Carefully review the Grading


Terrorism in the Age of Globalization Humanities Assignment Help

Discuss all of the following questions using several different examples from the text, or video, and original analysis of your own.

  • In what ways has the globalization of Europe affected the world economy—particularly the gap between rich and poor countries?
  • In what ways has the globalization of Europe affected the political aspirations of nations and nation-states?
  • What role does modern technology play in terrorism during the age of globalization?
  • What role does nationalism play in terrorism?
  • What causes an individual to become a terrorist?
  • How is the average European affected by terrorism in the age of globalization?

Your initial post should be at least 250 words in length. Support your claims with examples from required material(s) and/or other scholarly resources, and properly cite any references.


Unity and Discord, history homework help Humanities Assignment Help

Discuss all of the following questions using several different examples from the text, or video, and original analysis of your own.

  • In what ways was Europe united in the last decade of the 20th century?
    • What were the political implications of European unity?
    • What were the social implications of European unity?
    • What were the economic implications of European unity?
  • In what ways was Europe divided in the last decade of the 20th century?
    • How did the Cold War contribute to these divisions?
  • What role did nationalism and genocide play in Europe during the last decade of the 20th century?
  • Did the collapse of communism have a positive or negative impact on Europe in the last decade of the 2oth century? Why?

Your initial post should be at least 250 words in length. Support your claims with examples from required material(s) and/or other scholarly resources, and properly cite any references.


Labor Relations Paper, management homework help Business Finance Assignment Help

you will complete and submit your Project Paper. You will complete an in-depth analysis of a current labor event in one of the following countries: China, Hong Kong, France, England/UK, Germany, or Mexico. Pick a single specific topic of labor relations to evaluate, such as strikes, formation, impasse resolution, etc. Pick one of the listed countries to investigate how the chosen labor relations topic is complied with or handled in that country. Research the Internet for 3-5 reputable sources regarding how the issue in the comparison country is handled. Reference the textbook and any chosen additional outside research sources as to how the chosen topic is handled in the United States prepare a comparison between the United States and the chosen alternate country regarding that aspect of labor relations; for instance, a comparison of how negotiation impasse in labor relations bargaining is handled in China compared to the United States. Comparative graphs are encouraged.

The paper will be in APA style and in Microsoft Word (.doc or.docx) or rich text format (.rtf), and it will be 5-7 pages in length not including a title page or reference page and any graphics chosen. You must include references to articles or news events discussed as well as at least three additional references to include the text. Refer to the rubric on the next page for grading criteria.



Triple Constraint, information technology and project management help Computer Science Assignment Help

Required Actions:

Research and read about the “Triple Constraint.”

Prepare a 2 page double spaced paper that discusses the following:

  • Many projects are challenged by the triple constraint. In your own words, explain the triple constraint and how it impacts projects. Provide an example of the triple constraint in a real project. In addition, explain whether meeting time, cost, and scope constraints are good indicators of project success. Finally, you are a major stakeholder in this class. As a stakeholder, what do you expect in order for the class to be a success – i.e. what are your success criteria?

Assignments will be assessed using the following criteria: 

  • Content:  the writing showed that you understood the questions the instructor asked, you have delivered a well-written paper with an appropriate introduction and conclusion.  You can use pictures and graphics to enhance your assignment.  However, it is best to leave them out if they do not add to the content of your assignment. 
  • Instructions:  you followed all the instructions.
  • Formatting:  the document is professional and formatted correctly.  The assignment will specify the accepted length of the paper. You should always include your name on the assignment as well as the title of the assignment. 
  • Citations and References:  If you used external references, the full reference is in the proper format with the necessary information.  You cited those references appropriately within the content of your paper.  If you use external references, you MUST include the full reference. You also need to cite the source within your paper. For citations, you can either directly quote the source when the author has something profound to say or you can reword the information from the source when the author has a unique idea. In either case, give credit to the author for the quotation or the unique idea but the bulk of your paper should be you expounding on the author’s ideas with your own words and ideas. Do not over-cite your paper. You should research the topic, process the information you learn, present your response to the assignment in your own words, and support that response with citations from your sources. Do not cite every sentence/paragraph of your assignment. 
  • Spelling and Grammar – there are few or no spelling or grammar errors. Everyone makes mistakes; therefore, you will receive full points if there are minimal spelling and grammar errors. Use correct spelling and grammar.  The instructor does check for spelling and grammatical errors.  The instructor will not correct spelling and grammar for you, but you will lose points if it is not correct. 

Triple Constraint, information technology and project management help Computer Science Assignment Help[supanova_question]

Review the lecture and conduct academic research on Zappos’s team building activities. Writing Assignment Help

  1. Review the lecture and conduct academic research on Zappos’s team building activities. Share one of them. Then, find and describe other team building exercises that facilitator’s use to share with the team and weigh in on them.

  2. Review the lecture and conduct academic research on stress management and, in particular, tips and techniques that are recommended and used. Pick one technique and explain it. Then, explain how what stress management tool you use (it could be a form of exercise, a hobby, a habit, etc.) helps you to reduce your stress.

  3. Scholars agree that Western interference has helped to shape
    Iranian political life before, during, and after the revolution. Share your
    thoughts on the question:

    Has Western influence been good for a country like Iran?
    Should the West try to have more influence, such as on Iran’s nuclear power
    program and their politics? Or has Western influence been more negative – or
    problematical – and, therefore, the West should be very cautious about imposing

    Paragraph 1-2  



Term Paper – Project Instruction

The purpose of the term paper is for the student to demonstrate a working knowledge and practical application of the concepts which were discussed over the course of the term. 

Students are encouraged to use Microsoft Power Point or other Office software to properly present their information.

Although hand drawn parts and processes are acceptable for submission, all drawings required for the project must be neat and legible and data is to be presented in an acceptable business format.

Please note that the paper is in the form of a presentation and a seperate paper is not necessary detailing the information of the presentation.

The following are the requirements and points allotted for the specific tasks of the assignment:


You may use an existing product that you can modify or change the component of a product to make the product a “green” product. If you have an idea that you currently are working on, test it out here.


  • Show the assembly drawing of the product and its parts. This should look like an instruction sheet with pictures to show how the individual components make up the assembly.(Hand made drawings scanned into the computer are acceptable).(10 pts)
  • List the raw materials that are required to make the part and the Bill of Materials that compose the assembly (B.O.M). For example, a chair is made of foam, fabric, wood and steel. Detail the amount of each material required for your product. For the assembly B.O.M. the components are the frame, legs, casters, seat adjuster and so on.. List the components you will need, the quantity requried and cost per piece. (10pts)


  • Show the process flow chart of your operation. How the components flow from one process to the next for assembly should be illustrated. In the flow chart , include the places where you must make a decision. These are normally the points where inspection and rework must take place. Be sure to include what happens when a part is rejected. (10pts)
  • Draw a simple layout your assembly system of your plant. Do you have straight line production? Do departments make components and feed an assembly line? Does your production line follow a lean manufacturing concept using the U shape for material flow? The material flow should also be documented. (10pts)
  • Determine the location of your plant and justify why you chose to be there. (10pts)


  • Show the break even analysis based upon an estimated annual sales of the product. These are based on your “market research”. Include a sentence as to where you found the data that allowed you to forecast your annual sales. (10 pts)


  • Describe the various methods of quality control, and quality assurance you will be using to maintain the products quality through out the assembly process and supply zero defect quality. What are you doing with rejected products in your assembly operation? Do you tear them down and recycle parts or do you scrap them?(10pts)


  • Describe how are you going to forecast the annual demand of the product. What system will you employ to regulate production? Will you make to order only or will your spread your production out over the year to capture seasonal trends? Include how long you are planning on making the product in it’s current state before you either redesign or get rid of the product line. Are you using planned obsolescence? (10pts)
  • Illustrate your production plan for the period of one year. Show your master production schedule and a material requirement planning schedule for the one year time frame.This should include the amount of materials needed monthly, the units produced monthly and the predicted sales monthly. (This can be done using an excel spreadsheet). (10pts)


  • List the references that you used for forecasting your sales, material costs and any other information necessary to complete the assignment.If you used web sites for your data, please reference them properly according to the MLA format. (10pts)


  • The project write up is due by 5:00 PM , Friday of week 8. Your project must be submitted through “Term Paper – Submission (Due: Friday of Week 8; 100 pts)” at the bottom of this page by this deadline. Early postings are acceptable. Any posting after this deadline will loose 4 points per day. No project will be accepted after 5 days past the posted deadline.


  • The project will be subjectively evaluated based upon the content and quality of the materials presented by you in each section as requested in the guidelines. Please follow the project outline and format to insure that all points of interest are included in your project write up. Points will be deducted if the project does not contain the criteria as detailed above.


Case Analysis The Decision Making Process (2 pages), writing homework help Writing Assignment Help

Assignment: Case Analysis: The Decision Making Process

You are to write a minimum, 2 page essay, on this week’s subject matter per below.

Also, please cite at least two (2) outside sources. This assignment does NOT have to be in APA format. You will also find a guide for your case study below.  Use an example from your work life in which a decision was made in an organization

Your case analysis should cover the following:

1. The context of the decision making processes, including for example: the goals, activities, history or culture of the organization; the complexity and special features of the task or problem; the major stakeholders of the decisions.

2. The main phases or activities of the decision making process, including for example: the background leading up to the problem situation; problem recognition; development and evaluation of alternatives; selection of alternative; and outcome of the decision. Where possible, analyze the information seeking and information use behaviors in the decision making process.

Use this link + 2 outside sources


White-Collar Crimes and Index Crimes, science homework help Science Assignment Help

White-Collar Crimes and Index Crimes

White-collar crimes got their name
based on the presumption that most perpetrators who commit these crimes were of
middle- to upper-class socioeconomic status. White-collar crimes include
embezzlement, fraud, identity theft, espionage, and money laundering. In the
past, these crimes did not garner a lot of attention from the media and the
public. The crimes that received the most attention were index crimes. Index
crimes include willful homicide, forcible rape, robbery, burglary, aggravated
assault, larceny over $50, motor vehicle theft, and arson. Data related to
index crimes is gathered annually by the Federal Bureau of Investigation (FBI)
and made public via the FBI’s annual Uniform Crime Reports.

While white-collar crimes had not
received a lot of attention in the past, advances in technologies have
increased opportunities to commit these types of crimes by individuals of
varying socioeconomic statuses. Using technology, these crimes also are able to
occur on a much larger scale than ever before. Despite the dangers of
white-collar crimes, they are not included in the FBI’s annual Uniform Crime

For this Discussion, examine the
seriousness of white-collar crimes and consider why they are not included in
the FBI’s annual Uniform Crime Reports.

Post by Day 4 to this Discussion. Examine the
seriousness of white-collar crimes and consider why they are not included in
the FBI’s annual Uniform Crime Reports.

One and a half page with at least two reference….

It is important that you cover all the topics identified in the
assignment. Covering the topic does not mean mentioning the topic BUT
presenting an explanation from the context of ethics and the readings for this

To get maximum points you need to follow the requirements listed for
this assignments 1) look at the page limits 2) review and follow APA rules
3) create subheadings to identify the key sections you are presenting and
4) Free from typographical and sentence construction errors.


  • Course Text: Taylor,
    R. W., Fritsch, E. J., & Liederbach, J. (2015). Digital crime and
    digital terrorism.
    (3rd ed.). Upper Saddle River, NJ: Pearson.
    • Chapter 6,
      “White-Collar Crimes”

Article: Barnett, C. (n.d.). The measurement of
white-collar crime using Uniform Crime Reporting (UCR) data
. Retrieved
December 15, 2011, from U.S. Department of Justice, Federal Bureau of
Investigation website:

Article: Croall, H. (2009). White-collar crime,
consumers and victimization. Crime, Law and Social Change, 51(1),

Article: Cullen, F. T., Hartman, J. L., & Jonson,
C. L. (2009). Bad guys: Why the public supports punishing white-collar
offenders. Crime, Law and Social Change, 51(1), 31–44.

Article: Gottschalk, P., & Solli-Saether, H.
(2010). Computer information systems in financial crime investigations. Journal
of Computer Information Systems, 50
(3), 41–49.

Article: Green, B. (2010). Thinking about white-collar
crime and punishment. Criminal Justice, 25(3), 1–5.

Article: Levi, M. (2008). White-collar, organised and
cyber crimes in the media: Some contrasts and similarities. Crime, Law and
Social Change, 49
(5), 365–377.

Article: U.S. Department of Justice, Federal Bureau of Investigation.
(2011). Uniform Crime Report: Crime in the United States, 2010: About the
Uniform Crime Reporting (UCR) Program. Retrieved from


Information Security Planning Computer Science Assignment Help

Information Security Planning Computer Science Assignment Help