# Statistical Error – HR Examples: Horn/Halo Effect & Central Tendency Mathematics Assignment Help

Statistical Error – HR Examples: Horn/Halo Effect & Central Tendency Mathematics Assignment Help. Statistical Error – HR Examples: Horn/Halo Effect & Central Tendency Mathematics Assignment Help.

(/0x4*br />

Statistical Error: Horn/Halo Effect

Definition: The tendency to allow one’s judgment of another person to be unduly influenced by an unfavorable (horns) or favorable (halo) first impression.

1. Provide a Human Resource decision that has to be made as an example to the horn/halo effect.

2. Errors typically occur because the data used to make the decision is flawed in some way. What flawed data could lead to the error for this decision?

3. Think about what data could be used instead (to avoid the error: horn/halo effect?

4. What parameter or statistic will you use to represent the dataset?

5. How could this help avoid the error?

Statistical Error: Central tendency

Definition: The tendency of managers to give all employees average ratings. This reduces the variance in the data to the point where it becomes useless.

1. Provide a Human Resource decision that has to be made as an example to the central tendency effect.

2. Errors typically occur because the data used to make the decision is flawed in some way. What flawed data could lead to the error for this decision?

3. Think about what data could be used instead (to avoid central tendency)?

4. What parameter or statistic will you use to represent the dataset?

5. How could this help avoid the error?

Criteria:

• A decision is named. An actual decision must be named in the example.
• The decision is relevant to HR. The decision should be relevant to one of the functions of HR (recruiting, selection, performance management, learning & development, compensation, safety, laws & regulations, etc.) or the overall HR strategy.
• The flawed data would lead to the error. The ‘flawed’ data describe should reasonably lead to the error covered this week.
• The alternate data would minimize the error. The alternate data (data to be used instead) is distinct from the flawed data and directly addresses the error.
• The parameter or statistic is appropriate to the data. A parameter or statistic is what will be used to represent the full dataset and is based on the distribution of the data. Examples include weighted scores, means, or modes. The parameter chosen should reasonably represent the data.
• Explanation of avoiding error. The explanation of how using different data could help avoid the error should be clear and accurate

Statistical Error – HR Examples: Horn/Halo Effect & Central Tendency Mathematics Assignment Help[supanova_question]

## Media 2-3 page paper Writing Assignment Help

This paper asks you to connect mediated communication to other interpersonal concepts to understand how technology affects how we communicate and vice versa.

Think about what you’ve learned about mediated communication and how it relates to culture, perception, or any of the other concepts covered in class (or that will be covered, if you’re feeling adventurous). For instance, what impact does mediated communication have on managing conflict? Or how can media literacy affect your self-perception? Please do not answer those questions directly; they are provided as examples only.

In fact, in your paper, you are going to focus on one of the articles listed under “Articles for Paper” in the Unit 5 Readings & Resources.

In 2-3 pages, address the following:

1. Briefly summarize the article you chose.

2. Discuss how it relates to the mediated communication, social media, and media literacy concepts presented in the text and other readings.

3. Discuss which other interpersonal concepts are present in the article. For instance, if you chose an article about breaking up via text (there isn’t one there, but let’s say there was), you might look at the nonverbal chapter and talk about how breaking up via text does not allow for the same nonverbal cues. You could write about how emoji stand in – for better or worse – for those nonverbals.

4. Find another similar example and discuss briefly how the two examples are related.

You must include a reference page with this paper, formatted in APA style (google if you need help). In total, you will need AT LEAST 4 sources:

1. the source to support C
2. the source to support D
3. textbook or course reading 1
4. textbook or course reading 2

THIS ASSIGNMENT MUST FOLLOW THIS FORMAT:

• 2-3 full pages in length (can be longer, but please do not make it much longer)
• saved as any of the following file types: .doc, .docx, .pdf, or .gdoc (If you are unable to save as one of these, please notify me BEFORE the paper is due)
• double-spaced
• Times New Roman
• 12 point, black font
• No cover page
• reference page does not count toward page count

[supanova_question]

## Synthesis Paper #1 Writing Assignment Help

Discipline:

– Design

Type of service:

Research Paper

Spacing:

Double spacing

Paper format:

MLA

Number of pages:

2 pages

Number of sources:

2 sources

Paper detalis:

The essay should
be 2-page paper , and use double space. Sketch pictures chould not be
counted into the words. If you use two sketches, and they account for
one page. The article should be 3 pages because sketch pictures occupy
one page.

the subject you choose should be in specific time period, such as Arts and Craft/Mission (1880 to1920)’s furniture.

You just need to help me find 2 2 hybrid digital/ manual sketches , and
each sketch must include notations with arrows describing the design. If
the picture you find does not have enough description, please add some
description, so I can follow what you did to do the sketch again.

sources are not required, if you use any sources, please follow MLA format.

[supanova_question]

## Please find the below question and complete all the requirements Computer Science Assignment Help

Review the included ISACA built risk case. You will need to complete the tasks identified in the later part of these slides labeled To Do. Re-evaluate the probability and risk level for all of the rows in table 2. When you make your decision on the new probability rating, you will need to justify this with one to two articles. When you identify the new risk level, you will need to identify two to three articles as examples or sources to justify the changes. Don’t just move it up or down, use current news and trends with similar companies to justify why you moved or even kept it the same. For each item, run a Quantitative or Qualitative risk analysis for a proposed mitigation. In other words, find a fix for each item and put a price tag with it. Decide what items are in budget and make your choice. You will add three new columns to table 2, one will be a proposed mitigation plan with budget and risk level from the FAIR methodology, and the second column will be if your risk decision (accept, mitigate, transfer, avoid). Submit the completed spreadsheet to the submission item in this week. You will also need to answer the 10 discussion questions at the end of the slides and submit those with your spreadsheet, either as a second page with answers in the cells or as separate document.

I would need the whole documentation in APA.

[supanova_question]

## GG Freightways IT Decision Paper Assignment Writing Assignment Help

GG Freightways (GGFRT) IT Decision Paper Assignment

Before you begin this assignment, be sure you have read the “GG Freightways Case Study,” any feedback on your proposed IT project from your ITSP Part 2 assignment, and the previously assigned course materials.

Purpose of this Assignment

This assignment gives you the opportunity to apply the course concepts to develop an IT Decision Paper to explain and defend an IT project at GG Freightways (GGFRT).This assignment specifically addresses the following course outcomes to enable you to:

• Apply best practices in information technology management and governance to make, defend, and justify an IT decision.

IT Decision Paper for Your Proposed IT Project

For your ITSP, Part 2, you proposed an IT project for GGFRT.Lance, the CIO at GGFRT, has asked you to write an IT Decision Paper to explain your proposed project. He wants to use the Paper to gain approval from the Governance Board to move forward with the project.This assignment uses a format for a Decision Paper that has been tailored to the course material covered in this class.You may work for an organization that has a format for IT decision papers, and it would be a good idea for you to look at it, but it will likely be structured a little differently from this one.Each organization develops tools and techniques that will work for them.

Assignment

You will develop an IT Decision Paper, using the outline below.Each of the topics to be included in your outline is covered in the course content readings assigned thus far.In addition to the course materials, at least one external resource (resource other than those provided in the class) must be used.Two or more cited references will earn top credit. Use a separate References page to list just the references you have cited.Remember to use the APA formatting rules and correctly cite and reference your sources with APA format.Use the Grading Rubric to be sure you have covered everything.

Please use this outline to build your IT Decision Paper. Use the numbering and headings shown below.

• Project Description – In two or three sentences:
(1) describe the IT project you proposed for GGFRT in Part 2 of your ITSP.
(2) Describe what major function(s) the system would perform and who would use it.(Do not provide a technical description with hardware, software, etc.)
• Strategic Alignment – In a short paragraph:
(1) explain how the proposed project aligns to the business strategic objectives in Part 1 of your ITSP, and,
(2) how the proposed project aligns to the IT strategies in Part 2 of your ITSP.
• IT Portfolio Roadmap Alignment – In a short paragraph:
(1) Briefly explain where this project fits into the IT Portfolio Roadmap you included in Part 2 of your ITSP.
(2) What functional area does it support?
(3) Where should it be included in the timeline – i.e., should it take priority or be done before another project in the IT Portfolio?
• IT Architecture – In a short paragraph:
(1) Briefly explain how this project fits in with other systems in place or in development at GGFRT.
(2) Explain whether it should interface with (share data of any kind with) other systems either in place or in development, what information is being shared, and its purpose.
(3) Explain whether it replaces another system or multiple systems in use at GGFRT.
• Benefits: Describe at a high level three (3) benefits the project provides to GGFRT.The benefits should correspond to the business strategies and the strategic alignment discussed in section 2 above.State the Business Strategic Objective.Then, discuss this relationship/alignment for each benefit to the Business Strategic Objective.Refer to course content readings from Week 4 on Value Attainment.External research may also be beneficial.

Your proposed project must be aligned directly with at least one business strategic objective and one IT strategy shown in your ITSP.

Refer to the Inventory of Current IT Projects in Part 1 of your ITSP and the IT Portfolio in Part 2 of your ITSP.

Please copy/paste the following table into your paper and complete it:

Additional instructions

*** Please use two or more scholar published articles to complete this work. Make note to cite all sources use

*** I have attached instructions and part 2 bellow

*** format the paper using the formatting instructions given.

**** Please use that and the Grading Rubric in the instruction guide to write this paper please

Comments from part- I was score 90%

Well done, you addressed the critical memo topics effectively. A well written memo that details the current IT department while outlining the direction you intend to take this department. Your memo format is good.

[supanova_question]

[supanova_question]

## Finance Mathematics Assignment Help

Complete the following textbook questions:

Chapter 14: Questions 14-3 through 14-5 on page 600

Chapter 15: Questions 15-1 through 15-5 on page 647

Business School Assignment Instructions

The requirements below must be met for your paper to be accepted and graded:

Write between 750 – 1,250 words (approximately 3 – 5 pages) using Microsoft Word in APA style, see example below.

Use font size 12 and 1” margins.

Include cover page and reference page.

At least 80% of your paper must be original content/writing.

No more than 20% of your content/information may come from references.

Use at least three references from outside the course material; one reference must be from EBSCOhost. Text book, lectures, and other materials in the course may be used, but are not counted toward the three reference requirement.

Cite all reference material (data, dates, graphs, quotes, paraphrased words, values, etc.) in the paper and list on a reference page in APA style.

References must come from sources such as scholarly journals found in EBSCOhost or on Google Scholar, government websites and publications, reputable news media (e.g. CNN , The Wall Street Journal, The New York Times) websites and publications, etc. Sources such as Wikis, Yahoo Answers, eHow, blogs, etc. are not acceptable for academic writing.

Finance Mathematics Assignment Help[supanova_question]

## Heating/Cooling Loads and Energy Simulation small project Engineering Assignment Help

ANY HELP IS APPRECIATED NOT ALL QUESTIONS NEED TO BE ANSWERED BUT PLEASE MAKE SURE IT’S CORRECT. Based on Stage 1 of the project “attached” continue Stage 2 including the following information:

B.)Description and explanation of material selection of walls, door, windows, ceiling/roof, and floors. Show

a typical cross section with ΣR. Explain design decisions such as ventilation, infiltration, shading coefficients, occupancy schedule, lights, appliances, design temperatures, etc.

C.)Computer printouts of results from Trane Trace for heating/cooling loads for the zones and the entire building. If comparison runs were made, then submit one complete set of output and just the tabulated results from the others. Attach Flash Drives or CDs

of TRACE files.

D.)Summary page with the following:

1.Zone and Building Heating Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

2.Zone and Building Cooling Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

*Sq. ft./ton of air conditioning

3.Pick one room that has:

a.Exterior wall

b.Exterior window

c.Appliances (can be minor)

d.Lights

e.People

Do a manual calculation of cooling load for that one room and compare to computer output.

Room must have at least one exterior wall, window(s), person/people, lights, and appliances. Roof/ceiling and conducting floor are optional.

[supanova_question]

## Chapter 8: Assignment Business Finance Assignment Help

You’re going to interview for management position with Ultra-Frame, a wooden picture frame manufacturer that sells hundreds of thousands of frames every year. As background for your interview, indicate which of the following are true and which are false.

SelectTrueFalse Operations management covers all the activities required to operate the distribution of goods and services.

SelectTrueFalse Companies like this frame manufacturer are reshoring because of significant quality issues and to save on shipping costs.

SelectTrueFalse The U.S. manufacturing workforce has remained steady during the past 30 years as a result of strong consumer demand.

SelectTrueFalse Planning for production takes place both before anything is produced and during the production process.

 In preparation for the interview with Ultra-Frame, you’ve researched its production process. Using the drop down menu, label the following pieces of information in the order in which they would take place during the conversion process. The conversion process is as follows: Inputs Plan Design Execute Evaluate Improve Redesign Outputs Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Every year, Ultra-Frame ships 500,000 picture frames from its factory to retailers. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Not long ago, Ultra-Frame obtained a loan to pay for new production equipment. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame surveys hundreds of customers every year to understand their perceptions of product quality. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Before creating any new frame, Ultra-Frame analyzes potential demand and production requirements. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame’s research and development department develops detailed drawings and specifications for each new product. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Based on the new product’s detailed drawings and specifications, Ultra-Frame manufactures the frame. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs After manufacturing an improved version, Ultra-Frame completely changes the specifications of any frame that customers still find to be unsatisfactory. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs When customers find a frame unsatisfactory, Ultra-Frame makes minor improvements to the frame and produces an improved version. Although you’re interviewing with Ultra-Frame, you’re also applying for a management job at Southwest Airlines, which flies more than 100 million passengers every year. Use the drop down menu to fill in the blank to complete each of these statements comparing Southwest and Ultra-Frame.Services such as those delivered by Southwest Airlines are Selecttangibleintangible and therefore it’s more difficult to evaluate customer satisfaction with the firm’s air travel compared with the picture frames produced by Ultra-Frame.Southwest Airlines can’t store its services, because they are Selectconsumedconverted immediately. In contrast, Ultra-frame can store its picture frames after production.Customers of Southwest Airlines are much Selectmoreless involved in obtaining the service they want or need, compared with Ultra-Frame’s manufactured goods.To be successful as a service business, Southwest Airlines follows Selectmany of the samemany different activities in the conversion process, compared with a manufacturing business like Ultra-Frame. You’ve taken the job at Ultra-Frame, where you will be part of the team working on new products. Use the drop down menu to match each of the following job responsibilities with the phrase that best describes it. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will develop new shapes, sizes, and finishes for wooden frames. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research new technology to make frames that will scan photos or artwork and transmit the images for customers to share on social media. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research the role of wood molecules in chemically degrading the surface of photos and artwork that customers put into your frames, with the goal of creating a frame to slow the degradation. Ultra-Frame’s top managers have approved three new scan-and-transmit picture frames as a product line. Instead of producing these frames in the current facility, the company will build a new plant with higher capacity. Using the drop down menu, identify the type of layout that each of these descriptions represents. For the final question, determine which layout best fits Ultra-Frame’s needs. Selectproduct layoutfixed-position layoutprocess layout The products remain in one place, with people and equipment moving around them to complete the assembly process. Selectproduct layoutfixed-position layoutprocess layout Products are created in small batches, with each operation performed in its own particular area. Selectproduct layoutfixed-position layoutprocess layout Each product undergoes the same operations in the same sequence, with workstations arranged to match the sequence of operations in the assembly line. Selectproduct layoutfixed-position layoutprocess layout This layout best fits Ultra-Frame’s needs. You recently became manager of the Hershey’s Kisses chocolate production facility in Pennsylvania. Identify the type of inventory described by each statement of job responsibility shown below. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager arranges for sugar, cream, and other ingredients to be delivered to the production facility only hours before use in the conversion process. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager checks on the output of Hershey’s Kisses waiting to be packaged and shipped to stores after production. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager tracks the number of Hershey’s Kisses moving through the production facility after the conversion process begins but before packaging is complete. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager calculates the amount of sugar, cream, and other ingredients on hand before production begins. At the Hershey’s Kisses production facility, you are considering a number of different ways to improve quality. Using the drop down menu, match each of these descriptions to the name of the technique. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will appoint a group of employees to work together as specific quality problems arise. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will compare your production processes to those used by industry leaders and adapt best practices for quality improvement. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will undertake incremental quality improvements on an ongoing basis. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will apply careful statistical measurements and improve methods to reduce and then eliminate defects. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will have a sample of every batch of Hershey Kisses examined to identify quality issues during work in process. Ultra-Frame has recruited you back from Hershey’s to become vice president of production for its two production facilities. The company’s new frames are a big success and you’re looking for ways to improve productivity. You just attended an industry conference where you viewed the latest technology. Indicate which of the following statements are true and which are false. SelectTrueFalse A flexible manufacturing system would enable Ultra-Frame to reprogram electronic equipment and switch to producing different products more quickly than with traditional manufacturing methods. SelectTrueFalse Ultra-Frame can stick with its continuous process if it does not plan to change its product line over the long term. SelectTrueFalse With robotics, Ultra-Frame could speed up production and allow employees to maintain the repetitive tasks without interruption. SelectTrueFalse If Ultra-Frame wants to produce different frames at different times, it can use an intermittent process to change equipment accordingly.

[supanova_question]

## Country Report Review #3 Humanities Assignment Help

Country Report Review. On MS-Word menu bar, click Home – Times New Roman – 12 font; Layout – Margins – Narrow and adjust Indent zero for all (Left, Right, Before, and After); and Paragraph – Alignment Left – Line Spacing zero.

Answer these following questions:

1- what is unique about the country compared to other European countries? Why?

2- what is the most interesting issue of the country, that you would discuss in class? Why?

the paper is one page it could be one big paragraph, make sure the margin is narrow and it is single spaced.

The country is United Kingdom as illustrated in the reading.

[supanova_question]

## the term project subject needs to be Assume: each artist may paint many painting, and each painting is painted by a single artist. Computer Science Assignment Help

0) Was the Term Project topic approved Yes or No (minimum 15% deduction, if not approved)

0) (10%) writing style, organization of submission, clarity, APA usage

1) (5%) Term Paper Abstract (include the purpose of this “database”, explain one question – query – you expect the database to be able to process – the query MUST require the use of information from more than one entity)

2) (5%) Who will use, and who will administrator the database.

3) (10%) Explain the design method / approach you followed – refer to design methods in our text.

4) (15%) Describe the initial entities (tables), and attributes (fields). For each field: describe what the contents of each field represents, the type of field, and any constraints that you would like to see applied. Identify and describe the primary key for each table.

5) (15%) Using the functional notation shown on page 413 Example 14.5, include a functional dependency analysis, ensure all fields in the database are included (at least once). Explain one row of the functional notation using plain English, and fields from your project to demonstrate your understanding. SEE NOTE1

6) (10%) Using the table names and rows from each table, explain the one-to-many or the many-to-many relationship(s) included in your design. SEE NOTE3

7) Design (it is possible that the same table or set of tables are in 1NF, 2NF, and 3NF; or 2NF and 3NF – in which case you need to repeat the tables for each normal form and explain why they meet that definition)

a) (10%) Using table notation – submit a complete set of 1NF tables (this may be one or more tables), include the first normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 1NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project. Once your tables are in first normal form proceed to the next step. SEE NOTE2 below:

b) (10%) Using table notation – submit a complete set of 2NF tables, include the second normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 2NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project.

c) (10%) Using table notation – submit a complete set of 3NF tables, include the third normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 3NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words.

Submit a Word compatible document. Name your document Last Name_TermProject (i.e. Smith_TermProject).

Contact the instructor with any questions.

NOTE1: Generic functional notation examples:

Field1 -> Field2

Field1 -> Field2, Field3

Field4, Field5 -> Field6

NOTE2: You can find an example of table notation on page 111 immediately under 4.2.6 label which shows the relational schema for part of the Dream Home database.

The basic table notation structure is: Table-name (field, field1, field2…)

DO NOT INCLUDE SPREADSHEET FIGURES

NOTE3: Review the Chapter 12 Study Aid document, as well as the Functional Dependency, Table Relationships, and the Parts and Suppliers examples in the Terms and Concepts Forum – if you need to refresh your knowledge base.

HINT: review your tables – for this exercise, 2 tables should not have the same primary key “and” keep in mind that tables will need to be linked (to satisfy the one-to-many or many-to-many relationship requirement), if we start with a single unnormalized or 1NF table – the normalization process ensures the needed links are included – often we start with more than one table, and while that is OK – we need to ensure tables are properly linked (sometimes using foreign keys, and sometimes using a junction table)

part two:

You designed a database in your Term Project. Now implement the 3NF tables in MS Access, including the relationships – ensure you use the same Table and Field names as your design, set the primary keys, and set the field types as described in your term project.

Here are the detailed requirements:

1) Create a “NEW” MS Access Database that matches your 3NF submission – ensure it properly reflects the 3NF Tables, Primary Keys, Fields, Foreign Keys, and relationship(s) that were designed

2) Populate the fields of each table in the database with at least 4 data sets (4 rows)

3) Create 1 Query (use the question proposed in the Term Project), it must use at least 2 tables and the relationship identified described in the design (if more than one relationship was submitted, then any one-to-many or many-to-many relationship would be acceptable)

4) Create 1 Report (you may choose the content)

[supanova_question]

https://anyessayhelp.com/) websites and publications, etc. Sources such as Wikis, Yahoo Answers, eHow, blogs, etc. are not acceptable for academic writing.

Finance Mathematics Assignment Help[supanova_question]

## Heating/Cooling Loads and Energy Simulation small project Engineering Assignment Help

ANY HELP IS APPRECIATED NOT ALL QUESTIONS NEED TO BE ANSWERED BUT PLEASE MAKE SURE IT’S CORRECT. Based on Stage 1 of the project “attached” continue Stage 2 including the following information:

B.)Description and explanation of material selection of walls, door, windows, ceiling/roof, and floors. Show

a typical cross section with ΣR. Explain design decisions such as ventilation, infiltration, shading coefficients, occupancy schedule, lights, appliances, design temperatures, etc.

C.)Computer printouts of results from Trane Trace for heating/cooling loads for the zones and the entire building. If comparison runs were made, then submit one complete set of output and just the tabulated results from the others. Attach Flash Drives or CDs

of TRACE files.

D.)Summary page with the following:

1.Zone and Building Heating Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

2.Zone and Building Cooling Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

*Sq. ft./ton of air conditioning

3.Pick one room that has:

a.Exterior wall

b.Exterior window

c.Appliances (can be minor)

d.Lights

e.People

Do a manual calculation of cooling load for that one room and compare to computer output.

Room must have at least one exterior wall, window(s), person/people, lights, and appliances. Roof/ceiling and conducting floor are optional.

[supanova_question]

## Chapter 8: Assignment Business Finance Assignment Help

You’re going to interview for management position with Ultra-Frame, a wooden picture frame manufacturer that sells hundreds of thousands of frames every year. As background for your interview, indicate which of the following are true and which are false.

SelectTrueFalse Operations management covers all the activities required to operate the distribution of goods and services.

SelectTrueFalse Companies like this frame manufacturer are reshoring because of significant quality issues and to save on shipping costs.

SelectTrueFalse The U.S. manufacturing workforce has remained steady during the past 30 years as a result of strong consumer demand.

SelectTrueFalse Planning for production takes place both before anything is produced and during the production process.

 In preparation for the interview with Ultra-Frame, you’ve researched its production process. Using the drop down menu, label the following pieces of information in the order in which they would take place during the conversion process. The conversion process is as follows: Inputs Plan Design Execute Evaluate Improve Redesign Outputs Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Every year, Ultra-Frame ships 500,000 picture frames from its factory to retailers. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Not long ago, Ultra-Frame obtained a loan to pay for new production equipment. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame surveys hundreds of customers every year to understand their perceptions of product quality. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Before creating any new frame, Ultra-Frame analyzes potential demand and production requirements. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame’s research and development department develops detailed drawings and specifications for each new product. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Based on the new product’s detailed drawings and specifications, Ultra-Frame manufactures the frame. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs After manufacturing an improved version, Ultra-Frame completely changes the specifications of any frame that customers still find to be unsatisfactory. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs When customers find a frame unsatisfactory, Ultra-Frame makes minor improvements to the frame and produces an improved version. Although you’re interviewing with Ultra-Frame, you’re also applying for a management job at Southwest Airlines, which flies more than 100 million passengers every year. Use the drop down menu to fill in the blank to complete each of these statements comparing Southwest and Ultra-Frame.Services such as those delivered by Southwest Airlines are Selecttangibleintangible and therefore it’s more difficult to evaluate customer satisfaction with the firm’s air travel compared with the picture frames produced by Ultra-Frame.Southwest Airlines can’t store its services, because they are Selectconsumedconverted immediately. In contrast, Ultra-frame can store its picture frames after production.Customers of Southwest Airlines are much Selectmoreless involved in obtaining the service they want or need, compared with Ultra-Frame’s manufactured goods.To be successful as a service business, Southwest Airlines follows Selectmany of the samemany different activities in the conversion process, compared with a manufacturing business like Ultra-Frame. You’ve taken the job at Ultra-Frame, where you will be part of the team working on new products. Use the drop down menu to match each of the following job responsibilities with the phrase that best describes it. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will develop new shapes, sizes, and finishes for wooden frames. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research new technology to make frames that will scan photos or artwork and transmit the images for customers to share on social media. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research the role of wood molecules in chemically degrading the surface of photos and artwork that customers put into your frames, with the goal of creating a frame to slow the degradation. Ultra-Frame’s top managers have approved three new scan-and-transmit picture frames as a product line. Instead of producing these frames in the current facility, the company will build a new plant with higher capacity. Using the drop down menu, identify the type of layout that each of these descriptions represents. For the final question, determine which layout best fits Ultra-Frame’s needs. Selectproduct layoutfixed-position layoutprocess layout The products remain in one place, with people and equipment moving around them to complete the assembly process. Selectproduct layoutfixed-position layoutprocess layout Products are created in small batches, with each operation performed in its own particular area. Selectproduct layoutfixed-position layoutprocess layout Each product undergoes the same operations in the same sequence, with workstations arranged to match the sequence of operations in the assembly line. Selectproduct layoutfixed-position layoutprocess layout This layout best fits Ultra-Frame’s needs. You recently became manager of the Hershey’s Kisses chocolate production facility in Pennsylvania. Identify the type of inventory described by each statement of job responsibility shown below. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager arranges for sugar, cream, and other ingredients to be delivered to the production facility only hours before use in the conversion process. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager checks on the output of Hershey’s Kisses waiting to be packaged and shipped to stores after production. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager tracks the number of Hershey’s Kisses moving through the production facility after the conversion process begins but before packaging is complete. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager calculates the amount of sugar, cream, and other ingredients on hand before production begins. At the Hershey’s Kisses production facility, you are considering a number of different ways to improve quality. Using the drop down menu, match each of these descriptions to the name of the technique. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will appoint a group of employees to work together as specific quality problems arise. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will compare your production processes to those used by industry leaders and adapt best practices for quality improvement. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will undertake incremental quality improvements on an ongoing basis. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will apply careful statistical measurements and improve methods to reduce and then eliminate defects. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will have a sample of every batch of Hershey Kisses examined to identify quality issues during work in process. Ultra-Frame has recruited you back from Hershey’s to become vice president of production for its two production facilities. The company’s new frames are a big success and you’re looking for ways to improve productivity. You just attended an industry conference where you viewed the latest technology. Indicate which of the following statements are true and which are false. SelectTrueFalse A flexible manufacturing system would enable Ultra-Frame to reprogram electronic equipment and switch to producing different products more quickly than with traditional manufacturing methods. SelectTrueFalse Ultra-Frame can stick with its continuous process if it does not plan to change its product line over the long term. SelectTrueFalse With robotics, Ultra-Frame could speed up production and allow employees to maintain the repetitive tasks without interruption. SelectTrueFalse If Ultra-Frame wants to produce different frames at different times, it can use an intermittent process to change equipment accordingly.

[supanova_question]

## Country Report Review #3 Humanities Assignment Help

Country Report Review. On MS-Word menu bar, click Home – Times New Roman – 12 font; Layout – Margins – Narrow and adjust Indent zero for all (Left, Right, Before, and After); and Paragraph – Alignment Left – Line Spacing zero.

Answer these following questions:

1- what is unique about the country compared to other European countries? Why?

2- what is the most interesting issue of the country, that you would discuss in class? Why?

the paper is one page it could be one big paragraph, make sure the margin is narrow and it is single spaced.

The country is United Kingdom as illustrated in the reading.

[supanova_question]

## the term project subject needs to be Assume: each artist may paint many painting, and each painting is painted by a single artist. Computer Science Assignment Help

0) Was the Term Project topic approved Yes or No (minimum 15% deduction, if not approved)

0) (10%) writing style, organization of submission, clarity, APA usage

1) (5%) Term Paper Abstract (include the purpose of this “database”, explain one question – query – you expect the database to be able to process – the query MUST require the use of information from more than one entity)

2) (5%) Who will use, and who will administrator the database.

3) (10%) Explain the design method / approach you followed – refer to design methods in our text.

4) (15%) Describe the initial entities (tables), and attributes (fields). For each field: describe what the contents of each field represents, the type of field, and any constraints that you would like to see applied. Identify and describe the primary key for each table.

5) (15%) Using the functional notation shown on page 413 Example 14.5, include a functional dependency analysis, ensure all fields in the database are included (at least once). Explain one row of the functional notation using plain English, and fields from your project to demonstrate your understanding. SEE NOTE1

6) (10%) Using the table names and rows from each table, explain the one-to-many or the many-to-many relationship(s) included in your design. SEE NOTE3

7) Design (it is possible that the same table or set of tables are in 1NF, 2NF, and 3NF; or 2NF and 3NF – in which case you need to repeat the tables for each normal form and explain why they meet that definition)

a) (10%) Using table notation – submit a complete set of 1NF tables (this may be one or more tables), include the first normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 1NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project. Once your tables are in first normal form proceed to the next step. SEE NOTE2 below:

b) (10%) Using table notation – submit a complete set of 2NF tables, include the second normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 2NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project.

c) (10%) Using table notation – submit a complete set of 3NF tables, include the third normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 3NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words.

Submit a Word compatible document. Name your document Last Name_TermProject (i.e. Smith_TermProject).

Contact the instructor with any questions.

NOTE1: Generic functional notation examples:

Field1 -> Field2

Field1 -> Field2, Field3

Field4, Field5 -> Field6

NOTE2: You can find an example of table notation on page 111 immediately under 4.2.6 label which shows the relational schema for part of the Dream Home database.

The basic table notation structure is: Table-name (field, field1, field2…)

DO NOT INCLUDE SPREADSHEET FIGURES

NOTE3: Review the Chapter 12 Study Aid document, as well as the Functional Dependency, Table Relationships, and the Parts and Suppliers examples in the Terms and Concepts Forum – if you need to refresh your knowledge base.

HINT: review your tables – for this exercise, 2 tables should not have the same primary key “and” keep in mind that tables will need to be linked (to satisfy the one-to-many or many-to-many relationship requirement), if we start with a single unnormalized or 1NF table – the normalization process ensures the needed links are included – often we start with more than one table, and while that is OK – we need to ensure tables are properly linked (sometimes using foreign keys, and sometimes using a junction table)

part two:

You designed a database in your Term Project. Now implement the 3NF tables in MS Access, including the relationships – ensure you use the same Table and Field names as your design, set the primary keys, and set the field types as described in your term project.

Here are the detailed requirements:

1) Create a “NEW” MS Access Database that matches your 3NF submission – ensure it properly reflects the 3NF Tables, Primary Keys, Fields, Foreign Keys, and relationship(s) that were designed

2) Populate the fields of each table in the database with at least 4 data sets (4 rows)

3) Create 1 Query (use the question proposed in the Term Project), it must use at least 2 tables and the relationship identified described in the design (if more than one relationship was submitted, then any one-to-many or many-to-many relationship would be acceptable)

4) Create 1 Report (you may choose the content)

[supanova_question]

https://anyessayhelp.com/) websites and publications, etc. Sources such as Wikis, Yahoo Answers, eHow, blogs, etc. are not acceptable for academic writing.

Finance Mathematics Assignment Help[supanova_question]

## Heating/Cooling Loads and Energy Simulation small project Engineering Assignment Help

ANY HELP IS APPRECIATED NOT ALL QUESTIONS NEED TO BE ANSWERED BUT PLEASE MAKE SURE IT’S CORRECT. Based on Stage 1 of the project “attached” continue Stage 2 including the following information:

B.)Description and explanation of material selection of walls, door, windows, ceiling/roof, and floors. Show

a typical cross section with ΣR. Explain design decisions such as ventilation, infiltration, shading coefficients, occupancy schedule, lights, appliances, design temperatures, etc.

C.)Computer printouts of results from Trane Trace for heating/cooling loads for the zones and the entire building. If comparison runs were made, then submit one complete set of output and just the tabulated results from the others. Attach Flash Drives or CDs

of TRACE files.

D.)Summary page with the following:

1.Zone and Building Heating Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

2.Zone and Building Cooling Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

*Sq. ft./ton of air conditioning

3.Pick one room that has:

a.Exterior wall

b.Exterior window

c.Appliances (can be minor)

d.Lights

e.People

Do a manual calculation of cooling load for that one room and compare to computer output.

Room must have at least one exterior wall, window(s), person/people, lights, and appliances. Roof/ceiling and conducting floor are optional.

[supanova_question]

## Chapter 8: Assignment Business Finance Assignment Help

You’re going to interview for management position with Ultra-Frame, a wooden picture frame manufacturer that sells hundreds of thousands of frames every year. As background for your interview, indicate which of the following are true and which are false.

SelectTrueFalse Operations management covers all the activities required to operate the distribution of goods and services.

SelectTrueFalse Companies like this frame manufacturer are reshoring because of significant quality issues and to save on shipping costs.

SelectTrueFalse The U.S. manufacturing workforce has remained steady during the past 30 years as a result of strong consumer demand.

SelectTrueFalse Planning for production takes place both before anything is produced and during the production process.

 In preparation for the interview with Ultra-Frame, you’ve researched its production process. Using the drop down menu, label the following pieces of information in the order in which they would take place during the conversion process. The conversion process is as follows: Inputs Plan Design Execute Evaluate Improve Redesign Outputs Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Every year, Ultra-Frame ships 500,000 picture frames from its factory to retailers. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Not long ago, Ultra-Frame obtained a loan to pay for new production equipment. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame surveys hundreds of customers every year to understand their perceptions of product quality. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Before creating any new frame, Ultra-Frame analyzes potential demand and production requirements. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame’s research and development department develops detailed drawings and specifications for each new product. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Based on the new product’s detailed drawings and specifications, Ultra-Frame manufactures the frame. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs After manufacturing an improved version, Ultra-Frame completely changes the specifications of any frame that customers still find to be unsatisfactory. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs When customers find a frame unsatisfactory, Ultra-Frame makes minor improvements to the frame and produces an improved version. Although you’re interviewing with Ultra-Frame, you’re also applying for a management job at Southwest Airlines, which flies more than 100 million passengers every year. Use the drop down menu to fill in the blank to complete each of these statements comparing Southwest and Ultra-Frame.Services such as those delivered by Southwest Airlines are Selecttangibleintangible and therefore it’s more difficult to evaluate customer satisfaction with the firm’s air travel compared with the picture frames produced by Ultra-Frame.Southwest Airlines can’t store its services, because they are Selectconsumedconverted immediately. In contrast, Ultra-frame can store its picture frames after production.Customers of Southwest Airlines are much Selectmoreless involved in obtaining the service they want or need, compared with Ultra-Frame’s manufactured goods.To be successful as a service business, Southwest Airlines follows Selectmany of the samemany different activities in the conversion process, compared with a manufacturing business like Ultra-Frame. You’ve taken the job at Ultra-Frame, where you will be part of the team working on new products. Use the drop down menu to match each of the following job responsibilities with the phrase that best describes it. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will develop new shapes, sizes, and finishes for wooden frames. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research new technology to make frames that will scan photos or artwork and transmit the images for customers to share on social media. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research the role of wood molecules in chemically degrading the surface of photos and artwork that customers put into your frames, with the goal of creating a frame to slow the degradation. Ultra-Frame’s top managers have approved three new scan-and-transmit picture frames as a product line. Instead of producing these frames in the current facility, the company will build a new plant with higher capacity. Using the drop down menu, identify the type of layout that each of these descriptions represents. For the final question, determine which layout best fits Ultra-Frame’s needs. Selectproduct layoutfixed-position layoutprocess layout The products remain in one place, with people and equipment moving around them to complete the assembly process. Selectproduct layoutfixed-position layoutprocess layout Products are created in small batches, with each operation performed in its own particular area. Selectproduct layoutfixed-position layoutprocess layout Each product undergoes the same operations in the same sequence, with workstations arranged to match the sequence of operations in the assembly line. Selectproduct layoutfixed-position layoutprocess layout This layout best fits Ultra-Frame’s needs. You recently became manager of the Hershey’s Kisses chocolate production facility in Pennsylvania. Identify the type of inventory described by each statement of job responsibility shown below. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager arranges for sugar, cream, and other ingredients to be delivered to the production facility only hours before use in the conversion process. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager checks on the output of Hershey’s Kisses waiting to be packaged and shipped to stores after production. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager tracks the number of Hershey’s Kisses moving through the production facility after the conversion process begins but before packaging is complete. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager calculates the amount of sugar, cream, and other ingredients on hand before production begins. At the Hershey’s Kisses production facility, you are considering a number of different ways to improve quality. Using the drop down menu, match each of these descriptions to the name of the technique. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will appoint a group of employees to work together as specific quality problems arise. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will compare your production processes to those used by industry leaders and adapt best practices for quality improvement. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will undertake incremental quality improvements on an ongoing basis. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will apply careful statistical measurements and improve methods to reduce and then eliminate defects. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will have a sample of every batch of Hershey Kisses examined to identify quality issues during work in process. Ultra-Frame has recruited you back from Hershey’s to become vice president of production for its two production facilities. The company’s new frames are a big success and you’re looking for ways to improve productivity. You just attended an industry conference where you viewed the latest technology. Indicate which of the following statements are true and which are false. SelectTrueFalse A flexible manufacturing system would enable Ultra-Frame to reprogram electronic equipment and switch to producing different products more quickly than with traditional manufacturing methods. SelectTrueFalse Ultra-Frame can stick with its continuous process if it does not plan to change its product line over the long term. SelectTrueFalse With robotics, Ultra-Frame could speed up production and allow employees to maintain the repetitive tasks without interruption. SelectTrueFalse If Ultra-Frame wants to produce different frames at different times, it can use an intermittent process to change equipment accordingly.

[supanova_question]

## Country Report Review #3 Humanities Assignment Help

Country Report Review. On MS-Word menu bar, click Home – Times New Roman – 12 font; Layout – Margins – Narrow and adjust Indent zero for all (Left, Right, Before, and After); and Paragraph – Alignment Left – Line Spacing zero.

Answer these following questions:

1- what is unique about the country compared to other European countries? Why?

2- what is the most interesting issue of the country, that you would discuss in class? Why?

the paper is one page it could be one big paragraph, make sure the margin is narrow and it is single spaced.

The country is United Kingdom as illustrated in the reading.

[supanova_question]

## the term project subject needs to be Assume: each artist may paint many painting, and each painting is painted by a single artist. Computer Science Assignment Help

0) Was the Term Project topic approved Yes or No (minimum 15% deduction, if not approved)

0) (10%) writing style, organization of submission, clarity, APA usage

1) (5%) Term Paper Abstract (include the purpose of this “database”, explain one question – query – you expect the database to be able to process – the query MUST require the use of information from more than one entity)

2) (5%) Who will use, and who will administrator the database.

3) (10%) Explain the design method / approach you followed – refer to design methods in our text.

4) (15%) Describe the initial entities (tables), and attributes (fields). For each field: describe what the contents of each field represents, the type of field, and any constraints that you would like to see applied. Identify and describe the primary key for each table.

5) (15%) Using the functional notation shown on page 413 Example 14.5, include a functional dependency analysis, ensure all fields in the database are included (at least once). Explain one row of the functional notation using plain English, and fields from your project to demonstrate your understanding. SEE NOTE1

6) (10%) Using the table names and rows from each table, explain the one-to-many or the many-to-many relationship(s) included in your design. SEE NOTE3

7) Design (it is possible that the same table or set of tables are in 1NF, 2NF, and 3NF; or 2NF and 3NF – in which case you need to repeat the tables for each normal form and explain why they meet that definition)

a) (10%) Using table notation – submit a complete set of 1NF tables (this may be one or more tables), include the first normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 1NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project. Once your tables are in first normal form proceed to the next step. SEE NOTE2 below:

b) (10%) Using table notation – submit a complete set of 2NF tables, include the second normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 2NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project.

c) (10%) Using table notation – submit a complete set of 3NF tables, include the third normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 3NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words.

Submit a Word compatible document. Name your document Last Name_TermProject (i.e. Smith_TermProject).

Contact the instructor with any questions.

NOTE1: Generic functional notation examples:

Field1 -> Field2

Field1 -> Field2, Field3

Field4, Field5 -> Field6

NOTE2: You can find an example of table notation on page 111 immediately under 4.2.6 label which shows the relational schema for part of the Dream Home database.

The basic table notation structure is: Table-name (field, field1, field2…)

DO NOT INCLUDE SPREADSHEET FIGURES

NOTE3: Review the Chapter 12 Study Aid document, as well as the Functional Dependency, Table Relationships, and the Parts and Suppliers examples in the Terms and Concepts Forum – if you need to refresh your knowledge base.

HINT: review your tables – for this exercise, 2 tables should not have the same primary key “and” keep in mind that tables will need to be linked (to satisfy the one-to-many or many-to-many relationship requirement), if we start with a single unnormalized or 1NF table – the normalization process ensures the needed links are included – often we start with more than one table, and while that is OK – we need to ensure tables are properly linked (sometimes using foreign keys, and sometimes using a junction table)

part two:

You designed a database in your Term Project. Now implement the 3NF tables in MS Access, including the relationships – ensure you use the same Table and Field names as your design, set the primary keys, and set the field types as described in your term project.

Here are the detailed requirements:

1) Create a “NEW” MS Access Database that matches your 3NF submission – ensure it properly reflects the 3NF Tables, Primary Keys, Fields, Foreign Keys, and relationship(s) that were designed

2) Populate the fields of each table in the database with at least 4 data sets (4 rows)

3) Create 1 Query (use the question proposed in the Term Project), it must use at least 2 tables and the relationship identified described in the design (if more than one relationship was submitted, then any one-to-many or many-to-many relationship would be acceptable)

4) Create 1 Report (you may choose the content)

[supanova_question]

https://anyessayhelp.com/) websites and publications, etc. Sources such as Wikis, Yahoo Answers, eHow, blogs, etc. are not acceptable for academic writing.

Finance Mathematics Assignment Help[supanova_question]

## Heating/Cooling Loads and Energy Simulation small project Engineering Assignment Help

ANY HELP IS APPRECIATED NOT ALL QUESTIONS NEED TO BE ANSWERED BUT PLEASE MAKE SURE IT’S CORRECT. Based on Stage 1 of the project “attached” continue Stage 2 including the following information:

B.)Description and explanation of material selection of walls, door, windows, ceiling/roof, and floors. Show

a typical cross section with ΣR. Explain design decisions such as ventilation, infiltration, shading coefficients, occupancy schedule, lights, appliances, design temperatures, etc.

C.)Computer printouts of results from Trane Trace for heating/cooling loads for the zones and the entire building. If comparison runs were made, then submit one complete set of output and just the tabulated results from the others. Attach Flash Drives or CDs

of TRACE files.

D.)Summary page with the following:

1.Zone and Building Heating Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

2.Zone and Building Cooling Loads

*BTU/hr.

*BTU/hr. sq. ft. (gross floor area)

*Sq. ft./ton of air conditioning

3.Pick one room that has:

a.Exterior wall

b.Exterior window

c.Appliances (can be minor)

d.Lights

e.People

Do a manual calculation of cooling load for that one room and compare to computer output.

Room must have at least one exterior wall, window(s), person/people, lights, and appliances. Roof/ceiling and conducting floor are optional.

[supanova_question]

## Chapter 8: Assignment Business Finance Assignment Help

You’re going to interview for management position with Ultra-Frame, a wooden picture frame manufacturer that sells hundreds of thousands of frames every year. As background for your interview, indicate which of the following are true and which are false.

SelectTrueFalse Operations management covers all the activities required to operate the distribution of goods and services.

SelectTrueFalse Companies like this frame manufacturer are reshoring because of significant quality issues and to save on shipping costs.

SelectTrueFalse The U.S. manufacturing workforce has remained steady during the past 30 years as a result of strong consumer demand.

SelectTrueFalse Planning for production takes place both before anything is produced and during the production process.

 In preparation for the interview with Ultra-Frame, you’ve researched its production process. Using the drop down menu, label the following pieces of information in the order in which they would take place during the conversion process. The conversion process is as follows: Inputs Plan Design Execute Evaluate Improve Redesign Outputs Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Every year, Ultra-Frame ships 500,000 picture frames from its factory to retailers. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Not long ago, Ultra-Frame obtained a loan to pay for new production equipment. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame surveys hundreds of customers every year to understand their perceptions of product quality. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Before creating any new frame, Ultra-Frame analyzes potential demand and production requirements. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Ultra-Frame’s research and development department develops detailed drawings and specifications for each new product. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs Based on the new product’s detailed drawings and specifications, Ultra-Frame manufactures the frame. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs After manufacturing an improved version, Ultra-Frame completely changes the specifications of any frame that customers still find to be unsatisfactory. Select1 Inputs2 Plan3 Design4 Execute5 Evaluate6 Improve7 Redesign8 Outputs When customers find a frame unsatisfactory, Ultra-Frame makes minor improvements to the frame and produces an improved version. Although you’re interviewing with Ultra-Frame, you’re also applying for a management job at Southwest Airlines, which flies more than 100 million passengers every year. Use the drop down menu to fill in the blank to complete each of these statements comparing Southwest and Ultra-Frame.Services such as those delivered by Southwest Airlines are Selecttangibleintangible and therefore it’s more difficult to evaluate customer satisfaction with the firm’s air travel compared with the picture frames produced by Ultra-Frame.Southwest Airlines can’t store its services, because they are Selectconsumedconverted immediately. In contrast, Ultra-frame can store its picture frames after production.Customers of Southwest Airlines are much Selectmoreless involved in obtaining the service they want or need, compared with Ultra-Frame’s manufactured goods.To be successful as a service business, Southwest Airlines follows Selectmany of the samemany different activities in the conversion process, compared with a manufacturing business like Ultra-Frame. You’ve taken the job at Ultra-Frame, where you will be part of the team working on new products. Use the drop down menu to match each of the following job responsibilities with the phrase that best describes it. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will develop new shapes, sizes, and finishes for wooden frames. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research new technology to make frames that will scan photos or artwork and transmit the images for customers to share on social media. SelectProduct extensionSynthetic developmentConversion focusProduct refinementDevelopment and implementation You will research the role of wood molecules in chemically degrading the surface of photos and artwork that customers put into your frames, with the goal of creating a frame to slow the degradation. Ultra-Frame’s top managers have approved three new scan-and-transmit picture frames as a product line. Instead of producing these frames in the current facility, the company will build a new plant with higher capacity. Using the drop down menu, identify the type of layout that each of these descriptions represents. For the final question, determine which layout best fits Ultra-Frame’s needs. Selectproduct layoutfixed-position layoutprocess layout The products remain in one place, with people and equipment moving around them to complete the assembly process. Selectproduct layoutfixed-position layoutprocess layout Products are created in small batches, with each operation performed in its own particular area. Selectproduct layoutfixed-position layoutprocess layout Each product undergoes the same operations in the same sequence, with workstations arranged to match the sequence of operations in the assembly line. Selectproduct layoutfixed-position layoutprocess layout This layout best fits Ultra-Frame’s needs. You recently became manager of the Hershey’s Kisses chocolate production facility in Pennsylvania. Identify the type of inventory described by each statement of job responsibility shown below. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager arranges for sugar, cream, and other ingredients to be delivered to the production facility only hours before use in the conversion process. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager checks on the output of Hershey’s Kisses waiting to be packaged and shipped to stores after production. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager tracks the number of Hershey’s Kisses moving through the production facility after the conversion process begins but before packaging is complete. Selectraw-materials inventoryjust-in-time inventoryfinished-goods inventorywork-in-process inventory The manager calculates the amount of sugar, cream, and other ingredients on hand before production begins. At the Hershey’s Kisses production facility, you are considering a number of different ways to improve quality. Using the drop down menu, match each of these descriptions to the name of the technique. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will appoint a group of employees to work together as specific quality problems arise. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will compare your production processes to those used by industry leaders and adapt best practices for quality improvement. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will undertake incremental quality improvements on an ongoing basis. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will apply careful statistical measurements and improve methods to reduce and then eliminate defects. SelectSix sigmaInspectionQuality circleContinuous improvementBenchmarking You will have a sample of every batch of Hershey Kisses examined to identify quality issues during work in process. Ultra-Frame has recruited you back from Hershey’s to become vice president of production for its two production facilities. The company’s new frames are a big success and you’re looking for ways to improve productivity. You just attended an industry conference where you viewed the latest technology. Indicate which of the following statements are true and which are false. SelectTrueFalse A flexible manufacturing system would enable Ultra-Frame to reprogram electronic equipment and switch to producing different products more quickly than with traditional manufacturing methods. SelectTrueFalse Ultra-Frame can stick with its continuous process if it does not plan to change its product line over the long term. SelectTrueFalse With robotics, Ultra-Frame could speed up production and allow employees to maintain the repetitive tasks without interruption. SelectTrueFalse If Ultra-Frame wants to produce different frames at different times, it can use an intermittent process to change equipment accordingly.

[supanova_question]

## Country Report Review #3 Humanities Assignment Help

Country Report Review. On MS-Word menu bar, click Home – Times New Roman – 12 font; Layout – Margins – Narrow and adjust Indent zero for all (Left, Right, Before, and After); and Paragraph – Alignment Left – Line Spacing zero.

Answer these following questions:

1- what is unique about the country compared to other European countries? Why?

2- what is the most interesting issue of the country, that you would discuss in class? Why?

the paper is one page it could be one big paragraph, make sure the margin is narrow and it is single spaced.

The country is United Kingdom as illustrated in the reading.

[supanova_question]

## the term project subject needs to be Assume: each artist may paint many painting, and each painting is painted by a single artist. Computer Science Assignment Help

0) Was the Term Project topic approved Yes or No (minimum 15% deduction, if not approved)

0) (10%) writing style, organization of submission, clarity, APA usage

1) (5%) Term Paper Abstract (include the purpose of this “database”, explain one question – query – you expect the database to be able to process – the query MUST require the use of information from more than one entity)

2) (5%) Who will use, and who will administrator the database.

3) (10%) Explain the design method / approach you followed – refer to design methods in our text.

4) (15%) Describe the initial entities (tables), and attributes (fields). For each field: describe what the contents of each field represents, the type of field, and any constraints that you would like to see applied. Identify and describe the primary key for each table.

5) (15%) Using the functional notation shown on page 413 Example 14.5, include a functional dependency analysis, ensure all fields in the database are included (at least once). Explain one row of the functional notation using plain English, and fields from your project to demonstrate your understanding. SEE NOTE1

6) (10%) Using the table names and rows from each table, explain the one-to-many or the many-to-many relationship(s) included in your design. SEE NOTE3

7) Design (it is possible that the same table or set of tables are in 1NF, 2NF, and 3NF; or 2NF and 3NF – in which case you need to repeat the tables for each normal form and explain why they meet that definition)

a) (10%) Using table notation – submit a complete set of 1NF tables (this may be one or more tables), include the first normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 1NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project. Once your tables are in first normal form proceed to the next step. SEE NOTE2 below:

b) (10%) Using table notation – submit a complete set of 2NF tables, include the second normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 2NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words. You need to demonstrate an understanding of the definition, and how it applies to your project.

c) (10%) Using table notation – submit a complete set of 3NF tables, include the third normal form definition from the Connolly text, or the Terms and Techniques Forum as a basis to explain why the tables are in 3NF. Additionally, include a plain English explanation – using fields in your tables – to explain this in your own words.

Submit a Word compatible document. Name your document Last Name_TermProject (i.e. Smith_TermProject).

Contact the instructor with any questions.

NOTE1: Generic functional notation examples:

Field1 -> Field2

Field1 -> Field2, Field3

Field4, Field5 -> Field6

NOTE2: You can find an example of table notation on page 111 immediately under 4.2.6 label which shows the relational schema for part of the Dream Home database.

The basic table notation structure is: Table-name (field, field1, field2…)

DO NOT INCLUDE SPREADSHEET FIGURES

NOTE3: Review the Chapter 12 Study Aid document, as well as the Functional Dependency, Table Relationships, and the Parts and Suppliers examples in the Terms and Concepts Forum – if you need to refresh your knowledge base.

HINT: review your tables – for this exercise, 2 tables should not have the same primary key “and” keep in mind that tables will need to be linked (to satisfy the one-to-many or many-to-many relationship requirement), if we start with a single unnormalized or 1NF table – the normalization process ensures the needed links are included – often we start with more than one table, and while that is OK – we need to ensure tables are properly linked (sometimes using foreign keys, and sometimes using a junction table)

part two:

You designed a database in your Term Project. Now implement the 3NF tables in MS Access, including the relationships – ensure you use the same Table and Field names as your design, set the primary keys, and set the field types as described in your term project.

Here are the detailed requirements:

1) Create a “NEW” MS Access Database that matches your 3NF submission – ensure it properly reflects the 3NF Tables, Primary Keys, Fields, Foreign Keys, and relationship(s) that were designed

2) Populate the fields of each table in the database with at least 4 data sets (4 rows)

3) Create 1 Query (use the question proposed in the Term Project), it must use at least 2 tables and the relationship identified described in the design (if more than one relationship was submitted, then any one-to-many or many-to-many relationship would be acceptable)

4) Create 1 Report (you may choose the content)

[supanova_question]

Statistical Error – HR Examples: Horn/Halo Effect & Central Tendency Mathematics Assignment Help

Statistical Error – HR Examples: Horn/Halo Effect & Central Tendency Mathematics Assignment Help