Two Interesting or Unexpected Points About Glass Discussion Science Assignment Help

Two Interesting or Unexpected Points About Glass Discussion Science Assignment Help. Two Interesting or Unexpected Points About Glass Discussion Science Assignment Help.

I’m working on a chemistry discussion question and need guidance to help me learn.
(/0x4*br />

Discussion: Solids

Solids can take many forms. In this chapter, we mainly studied crystalline solids. Many solids that we come across in our daily lives are amorphous solids. Choose a solid. Do some research and provide some information about it, including it’s composition. Classify it as a crystalline solid or amorphous solid. If it is crystalline, is it an atomic solid, ionic solid, or covalent solid? There are many examples in the textbook. Here are some potential topics.

  • Carbon
    • Allotropes
      • graphite
      • diamond
      • nanotubes
      • fullerenes
  • Ceramics
      • Silicate ceramics
        • Clays
        • Porcelain
      • Oxide ceramics
      • Nonoxide ceramics
  • Cement
  • Glass
  • Plastics and polymers
  • Semiconductors

In your discussion, include the following

  • Name and classification of the solid (amorphous or crystalline, if crystalline: atomic solid, covalent solid, or network covalent solid)
  • Chemical composition of the solid. Is it a pure substance? If so, what is the chemical formula? Is it a mixture? If so what are the chemical formulas of the components. If all components are not known, what are the major components? Is a reaction required to form the solid?
  • Information about the solid. Why did you choose it? Provide two particularly interesting or unexpected points about the solid that you learned from your research and think that the class would also find intriguing.
  • 2 references

Grading

  • A post written in paragraph form, that
    • Provides the name and classification of the solid
    • Adequately explains the chemical composition of the solid
    • Explains two things that were particularly interesting or unexpected that came about from research
  • Gives two references

Two Interesting or Unexpected Points About Glass Discussion Science Assignment Help[supanova_question]

San Diego State University Influences on Development Historical Foundation Discussion Humanities Assignment Help

I’m working on a psychology question and need guidance to help me understand better.

This week you read about the influences on development, theories of development, and learned about some of the limitations of each theory. There are many challenges associated with analyzing human development that school counselors must consider. Discuss your thoughts on the following discussion questions, and be sure to use evidence from your readings and course materials to support your beliefs.

  1. What characteristics and qualities of individuals may be based more on nature than on nurture? Which may be more based on nurture than on nature?
  2. Which theories are most compatible with your beliefs about how children and adolescents develop and why?

[supanova_question]

Dimensional Structure of the Ligand Binds Discussion Paper Science Assignment Help

I’m working on a chemistry discussion question and need guidance to help me learn.

Discussion: Molecular Shapes

Instructions

The last discussion’s focus was on Lewis structures. The molecular geometry around each atom can be predicted from Lewis structures. Of course there are variations for bond angles, and some bonds allow for rotation about the bond axis. Therefore, large molecules can adopt complicated shapes. Still, a molecule’s structure is usually important for its function. For this discussion, you will examine how a drug interacts with its target.

  1. Visit the https://www.rcsb.org/
  2. In the menu bar, select Search -> Browse by Annotation.
  3. Click the Anatomical Therapeutic Chemical Classification System link
  4. Find a topic that interests you and continually expand the menus until you come across an interesting drug, then select it (expand by clicking the triangles on the left).
  5. Once you make a selection, you may be presented with several options. Choosing the most relevant option will likely require advance knowledge of biology and biochemistry, but that’s okay. Just choose one (you can limit the interactions to human proteins by choosing Organism: Homo sapiens). For example, I chose the antibacterial drug, tetracycline. I did not choose Homo sapiens, since I know this drug binds to bacterial proteins. To view the structure, click the corresponding link.
    • Screenshot of list of PDB structures that have tetracycline
  6. In most cases, there will be too many atoms. For this discussion, we want to look at how the drug structure interacts with its target. Click on the “Ligand Interaction” link. This will take you to a close-up of the region where the drug binds to its target. Make sure you click the Ligand Interaction link while you are in the Structure Summary tab. You might run into trouble if you click the 3D view button or 3D view tab first, so don’t do this.
    • Screenshot of structure
    • Your view should contain portions with white bonds and portions with grey bonds. The portion with white bonds is the target. The portion with grey bonds is the drug. The positions of the atoms presented are based on experimental data.
  7. To get a feel for the 3 dimensional structure, you can rotate the image and zoom using a mouse. Find a good orientation that shows the drug and take a screenshot.
  8. Finally obtain a picture for the Lewis Structure of only the drug.

For your discussion, provide:

  • The name of the drug and its target (the common name of the drug is preferred).
  • An image of the Ligand View of the drug bound to its target.
  • An image of the Lewis structure of just the drug alone.
  • Give a short description of the drug and what condition it treats.
    • An example of the two images. They were placed side-by-side by first creating a table with 1 row and 2 columns.
    • screenshot of structureTetracycline interaction with E. coli ribosome. lewis structure of tetracyclineLewis structure (abbreviated) of tetracycline.Image Credit: Vaccinationist / Public domain

[If you are interested, tetracycline is an antibacterial drug that binds to bacterial ribosomes. The ribosome is necessary for protein synthesis, and tetracycline inhibits protein synthesis, thereby causing susceptible bacteria to die. The screenshot above shows how tetracycline binds to the ribosome. You may know that humans also have ribosomes in their cells, which are also required for protein sysnthesis. However, the bacterial ribosome and human ribosome are different. Tetracycline binds to bacterial ribosomes, but not to human ribosomes, which makes it an effective antibacterial drug.

Some bacteria have developed a way to become resistant to tetracycline. This resistance system in these bacteria is regulated by a protein that binds to tetracycline. The other entries that came up as results in the initial search show how tetracycline binds to the protein that regulates antibiotic resistance in bacteria.]

Grading

  • (2 pts) Provides the name of the drug and its target.
  • (2 pts) Provides an image that shows how the 3-dimensional structure of the ligand binds to a target
  • (2 pts) Provides an image of the Lewis Structure of the drug
  • (2 pts) Gives a description of the drug and the condition it treats.

[supanova_question]

LAMC A Good Man Is Hard to Find & A Rose for Emily Story Comparison Discussion Humanities Assignment Help

I’m working on a english writing question and need support to help me learn.

Hi, I have an assignment with an open question I have to find similarities between components of character, point of view, theme, and setting. The two short stories I have written about at Flannery O’Connor “A Good Man Is Hard to Find” and Faulkner “A Rose for Emily”. I cannot use any outside sources for this paper and I need help revising the paper and making it sound better as in grammar, past tense, and present tense no use of first-person… it is an MLA paper. I will attach my current draft to this assignment please let me know if you have any question.

[supanova_question]

ECE 210 Grand Canyon University Pre Assessment & Standard Alignment Paper Writing Assignment Help

I’m working on a writing project and need a sample draft to help me understand better.

The process of instructional design can be cumbersome and challenging. The learning cycle requires the educator to prepare for and instruct students, identifying how their students learn best, the purpose of learning, and appropriate ways to engage students. Having an understanding of instructional design to include standards, objectives, instruction, and assessment better supports alignment in classroom learning. Each component of the learning cycle is a key step in meeting the instructional requirements of learning.

For this assignment, research the components of the learning cycle. Complete “Instructional Design Topic 1: The Learning Cycle” within the “Instructional Design Unit” template by clearly defining the different stages of the cycle.

Additionally, in 250-500 words, discuss the following in the Learning Cycle Summary portion of the template:

  • How the learning cycle is developmentally appropriate and promotes growth for young students.
  • How the learning cycle supports students’ strengths and diverse backgrounds.
  • A minimum of two instructional strategies for the grade level you intend to teach.

Support your response with 2-3 scholarly resources.

While APA style is not required for the body of this assignment, solid academic writing is expected, and documentation of sources should be presented using APA formatting guidelines.

ONLY COMPLETE TOPIC 1 FROM THE TEMPLATE. ANSWER DIRECTLY ON THE TEMPLETE AND NOT ON A SEPERATE OR NEW PAPER.

Some resources that may help…

Read “Developmentally Appropriate Practice in Early Childhood Programs Serving Children from Birth through Age 8,” located on the NAEYC website.

https://www.naeyc.org/files/naeyc/file/positions/PSDAP.pdf

Read “Using the Learning Cycle as a Model for Teaching the Learning Cycle to Preservice Elementary Teachers,” by Hanuscin and Lee, from Journal of Elementary Science Education (2008).

undefinedhttp://files.eric.ed.gov/fulltext/EJ798580.pdf

[supanova_question]

[supanova_question]

Business Group Questions Discussion Business Finance Assignment Help

I’m working on a business question and need a sample draft to help me understand better.

1. Propose 5-10 questions for a group discussion in our class.

2. Generate these questions carefully as you are going to be graded on the quality of your contribution to our group discussion.

3. Please review the general topics and subject matter we have covered below thus far and raise any questions you have about the content that you would like to discuss in a group or raise an area for discussion that we have not yet covered.

a. Market Research

b. Spotting Business Opportunities

c. A Process for Developing a Technology Startup

d. Business Concept Validation

e. Feasibility Studies

f. End User Profile / Personas

g. Full Life Cycle Use Case Analysis

h. Business Model Analysis

4. Make sure your questions are clearly marked as “Question 1,” “Question 2,” “Question 3,” etc.



Business Group Questions Discussion Business Finance Assignment Help[supanova_question]

FIN 4309 UHD Capital Management and Firm Performance Essay Economics Assignment Help

I’m working on a finance project and need a sample draft to help me learn.

Lenght: A minimum of 12 pages, double spaced typewritten, not counting title-page, appendices, endnotes, etc. 

Topic: Topic Suggestions for Term Paper

Fin 4309

Firm performance and relations with other factors

  • Working capital management and firm performance
  • Dividend policy and firm performance
  • Stock repurchase decision and firm performance
  • Firm size and firm performance
  • Growth opportunities and firm performance
  • Innovation efficiency and firm performance
  • Product market competition and firm performance
  • Derivative use and firm performance
  • Earning management and firm performance
  • Corporate disclosure policies and firm performance

Capital Structure and other related topics

Firm capital structure and its determinants

Firm capital structure and tests of pecking order theory

Firm capital structure and tests of trade off theory

Firm capital structure and tests of static and dynamic trade off theories

Firm capital structure and personal and corporate taxations

Firm capital structure and marginal tax rates

Firm capital structure and tests of agency theory

Firm capital structure and firm dividend policy

Firm capital structure and firm investment decisions

Firm capital structure and firm growth opportunities

Firm capital structure and underinvestment problems

Firm capital structure and free cash flow hypothesis

Firm capital structure and human capital hypothesis

Firm capital structure and legal protection of investors

Firm capital structure and country legal system

Firm capital structure and judicial efficiency of a country

Firm capital structure and bankruptcy costs

Firm capital structure and managerial ownership

Firm capital structure and firm size

Firm capital structure and growth opportunities

Firm capital structure and product market competition

Firm capital structure and country’s culture

Firm capital structure and economic policy uncertainty

Firm capital structure and inflation

Firm capital structure and investment timing

Firm capital structure and market timing

Firm capital structure and capital market development

Firm capital structure and credit rating of a firm

Firm capital structure and information asymmetry costs

Firm capital structure and transaction costs of external finance

Firm capital structure and bank vs market-based economies

Firm capital structure and control rights and cash flow rights

Firm capital structure and institutional framework

The Audience: The paper should be aimed at providing your class-mates with significant depth in the subject area of your choice

[supanova_question]

MMSL 6112 Ashford University Week 1 History of the Cultures Formation Discussion Business Finance Assignment Help

I’m working on a business question and need guidance to help me understand better.

Discussion 2 – Week 1

Levels of Culture Within Your Community

As Schein (2009) noted, identifying and defining the culture of an organization can be challenging at best. To begin developing your cultural awareness, start by examining a culture with which you are already familiar. Here in our Discussion, you will examine the elements and dimensions in your own community and apply Schein’s (2009) levels of culture, which include artifacts, espoused values, and shared tacit assumptions.

To prepare for this Discussion, pay particular attention to the following Learning Resources:

Schein, E. H. (2009). The corporate culture survival guide. San Francisco, CA: Jossey-Bass.

  • Chapter 2, Figure 2.1

Schein, E. (2014a). Culture fundamentals from Edgar Schein. Retrieved from

By Day 3

Post a cohesive response based on your analysis of the Learning Resources and your professional experience. Be sure to analyze the following:

  • A description of the artifacts within your community.
  • A description of the espoused values within your community.
  • A description of shared tacit assumptions, or underlying assumptions within your community.
  • An analysis of how knowledge of community artifacts, values, and assumptions enable leaders to build their leadership skills.

Be sure to support your ideas by connecting them to the week’s Learning Resources, as well as other credible resources you have read; or what you have observed and experienced. Minimum two resources are required.

Your original post, due by Day 3, will typically be 1 full single space page in length, as a general expectation/estimate. Refer to the Week 1 Discussion 2 Rubric for grading elements and criteria. Your Instructor will use the rubric to assess your work.

[supanova_question]

MBA 670 University of Maryland Stakeholder Management Plan Discussion Paper Business Finance Assignment Help

I’m working on a business report and need guidance to help me learn.

Just need help with Project 2 Step 8 (Project Management Plan, Subtask: Stakeholder Management Plan) however the entire project is posted below just for reference. Question #8 in the Project Management Template ONLY


Project 2: Project Management in an International Environment
Step 1: Become Familiar with Project Scope

A few hours after your call with Latoya Green, you receive an email from her executive assistant that defines the high-level deliverables and timelines for this project in a project statement of work (SOW).

INBOX: 1 New Message

Subject: Deliverables and Timeline for Store Opening

From: Cassandra Seltzer, Executive Assistant, TCS, Inc.

To: You

Greetings,

You will need to know the high-level deliverables and timelines for this project, which can be found in the project statement of work (SOW).

The SOW for this project lists the following requirements:

  • design the new store building, garage, parking lots, and landscaping
  • obtain required licenses and permits
  • prepare the site and lay the foundation
  • construct the new store building and finish the interior
  • construct the garage and garden center
  • outfit the store with shelves, fixtures, and IT systems (e.g., communications and payment systems)
  • pave the parking lots and landscape the exterior of the store
  • stock the store with inventory (For this project, stick to a storewide, high-level inventory budget, though you may have to make estimates based on different product categories, such as lumber, hardware, appliances, etc.)
  • staff, hire, and train store personnel

The SOW specifically notes that your project scope does not include the following:

  • marketing or publicity
  • other actions and costs related to operation of the new store

This project will require that you and your team create the following deliverables within the time frames described in this project, using standard templates provided in subsequent steps by TCS management. These steps will ensure that the new store is fully operational by the target date. Those deliverables, described in detail later, include the following:

  • a project charter
  • a stakeholder management plan
  • a high-level work breakdown structure (WBS) for the project
  • a risk register that identifies 5–10 key project risks and the team’s proposed responses for handling such risks
  • a Gantt chart showing key project activities and the project’s critical path
  • a high-level project cost estimate, with supporting justifications, for the labor, materials, and overhead for the new facility to be ready for operation by the assigned target date
  • a project management plan

Thank you for your attention. Our group will be in touch.

Cassandra Seltzer

Email signature with Terrapin Construction Supply, Inc corporate logo, Cassandra Selzer, Executive Assistant, and contact info

From your client file on Terrapin Construction Supply, Inc., you are informed that there are five major product groups at each TCS store: plumbing and electrical supplies; building materials; hardware and tools; seasonal, garden, and yard items; and paint, flooring, and wall coverings.

Each TCS store has a store manager, assistant store manager, bookkeeper, information systems manager, a manager for each of the five major product groups, customer service employees to assist with purchases on the store floor, cashiers, receiving and stocking employees, and maintenance and janitorial employees.

In summary, you know a lot about what you need to have 10 months from now, but how will you get there? You do not have much experience with formal project management so you message a colleague who recently acquired a project management professional (PMP) certification.

In the next step, your friend delivers the requested help, outlining several key project management topics.

Project 2: Project Management in an International Environment
Step 2: Become Familiar with Project Management Concepts

In the previous step, you received a SOW and the authorized templates from the CEO’s office. You also put out an SOS to a friend, who emails you the next day.

INBOX: 1 New Message

Subject: Re: Help!

From: Jorge Linville

To: You

Got your message, good to hear from you and glad to hear you’re still with Maryland Creative Solutions.

Sounds like a big project you’ve been tasked with. I’m happy to help out where I can.

To begin, I’d suggest doing some background reading to familiarize yourself with a few key topics. I’ll help get you get started:

Those are the basics, at least. Hope this helps, and good luck!

Jorge

Email signature of Jorge Linville, Project Manager, and contact info

After you have reviewed these project management resources, proceed to the next step, where you will develop a project charter.

Project 2: Project Management in an International Environment
Step 3: Develop a Project Charter

Very glad that you reached out for Jorge’s insight and resources, you proceed with the formal requirements listed in the project statement of work.

Your team has established guidelines for communication and accountability on this project. Now, your team will need to develop a project charter using the provided project charter template. While this document will not be turned in until the end of Week 4, it will guide your development of the project management plan. Note that TCS CEO Latoya Green is your project sponsor and the key stakeholder who must approve and sign the project charter.

When you have completed your project charter, continue to the next step, where you will develop a stakeholder management plan.

Project 2: Project Management in an International Environment
Step 4: Develop a Stakeholder Management Plan

Following your team project charter, you are invited to a check-in web meeting with MCS CEO Jillian Best to discuss next steps with the TCS project:

Calendar Invite: Jillian Best, CEO

“I’m glad your team has agreed on a charter for TCS,” Jillian says. “Now I want you to really start nailing down some of the specifics of this project, such as involved parties, responsibilities, risks, and costs.

“To this point, TCS management has provided you with information and templates for this project, your team has set guidelines to work together effectively, and you have used that information to develop a project charter for Latoya Green to approve. Now, you are ready to begin thinking about stakeholders and stakeholder management.

“Your team needs to develop a stakeholder management plan. I’m attaching a stakeholder management plan template to follow. The plan should identify potential stakeholders by their general role, such as CFO, local government offical, vice president of marketing, etc. There is one exception: You must name Latoya Green as your project sponsor.

“Good work team, looking forward to seeing the stakeholder management plan.”

When you have completed your stakeholder management plan, continue to the next step, where you will develop a work breakdown structure and Gantt chart.

Project 2: Project Management in an International Environment
Step 5: Create the Work Breakdown Structure and Gantt Chart

In previous steps, you identified all stakeholders, both internal and external to your team, and created a communication plan to manage their expectations. Now your team must consider how you will handle the work breakdown structure (WBS) and Gantt charts.

Create a draft of the work breakdown structure based on the provided WBS template. Then, using Microsoft Project, create a high-level WBS for your project that covers the key facets set out in the statement of work, such as the design of the new store. All required dependencies for activities should be established. That work will be used to create your Gantt chart with the project schedule. Ensure that your Gantt chart indicates the critical path in red. If you need help, please follow these Microsoft Project guidelines.

For feedback from your instructor, submit your project charter, stakeholder management plan, WBS, and Gantt chart to your team’s group discussion area only. Then continue to the next step, where your team will develop a project risk register for this store construction project.

Project 2: Project Management in an International Environment
Step 6: Create the Risk Register

Risk is a factor in every project. Each stakeholder and each element in your work breakdown structure, especially along the critical path, introduces risk. Identifying and managing these risks is critical to ensuring project success. Read more in Project Risk and Risk Register.

In this step, your team will develop a project risk register using the provided risk register template. The risk register must include at least 10 project risks, both internal and external, as well as the projected response or responses to those risks. Keep in mind that you are conducting a project in a foreign country, Brazil, which itself will add some risk because the official language in Sao Paulo, Brazil is Portugese.

When you have completed your risk register and identified at least 10 project risks, continue to the next step, where you will develop a project cost estimate.

Project 2: Project Management in an International Environment
Step 7: Estimate Project Cost

Your team has already identified the details of the work schedule in a work breakdown structure and visualized these details in a Gantt chart with a critical path. You also used your stakeholder management plan to determine who needs to be informed of progress on the project and when. And you’ve planned out responses to the risks you identified. Now, you must determine the cost to build and operate this store. You must also estimate the costs of the required inventory inside the store and the hiring and training of employees to begin operations. Read Project Cost Estimating and Project Procurement for help in answering this question.

For this project, your team only needs to research and provide high-level budget estimates for the various work packages or the higher-level work activities. For example, building the store itself might be broken down into design, site preparation (your company already owns the land), permit costs, plumbing, electrical, etc. Or, you may prefer to just use major categories such as design, build, and outfit. Consider other project procurements that may be required for your project. Develop your own project cost estimate template. While your research will yield material, labor, and overhead cost data in Brazilian real (BRL), for the purpose of this assignment, you will convert all cost figures to US dollars (USD).

When you have completed the project cost estimate, continue to the next step, where you will complete your project management plan.

Project 2: Project Management in an International Environment
Step 8: Complete the Project Management Plan

Before any work can start on the new TCS store in Sao Paulo, Brazil your team must put all the work you’ve done so far into a project management plan.

Use the project management plan template to create your plan. Your plan should be 15 to 20 pages, double spaced, excluding cover page, executive summary, reference list, and appendices. Any tables, graphs, and figures should be included as appendices. Your report should have one-inch margins and be double spaced in 12-point Times New Roman font. In-text citations and references should abide by APA format. The report should be organized using headings and subheadings to improve its readability.

For clarity, the plan should cover key elements in the main body of the plan, and then use appendices for detailed data. For example, you could provide a summary cost breakdown in the main body, and the detailed breakdown of costs in an appendix, such as an Excel spreadsheet.

Your final project management plan will consist of two files: the completed template and the Microsoft Project file (*.mpp) containing your WBS and Gantt chart. Submit these files in the dropbox located in the final step of this project by the end of Week 4. Also, each team will post one copy of the final project management plan in the team’s group discussion area.

[supanova_question]

HLT 520 Grand Canyon University Ethical Decision Making Discussion Economics Assignment Help

I’m working on a economics question and need an explanation to help me learn.

Write a 1,250-1,500 word paper in which you explore decision-making methods that can be used to resolve an ethical dilemma using the scenario provided in the assigned reading, “An Unconscious Patient With a DNR Tattoo.” Describe how to use the principles of ethical decision making (reviewed in this topic) to help resolve this ethical dilemma. Address the scenario to generate your conclusions about how you would proceed.

  1. What are the dimensions of the ethical dilemma?
  2. What are the potential organizational policies to which you will refer?
  3. Analyze the situation using one of the ethical theories discussed in the textbook. Describe how one might formulate assistance to the clinical staff using this theory.
  4. Describe the importance of reasoning in the decision-making process.
  5. Considering this dilemma, describe how a Christian worldview would inform ethical responsibilities?

[supanova_question]

Two Interesting or Unexpected Points About Glass Discussion Science Assignment Help

Two Interesting or Unexpected Points About Glass Discussion Science Assignment Help

× How can I help you?